JOB VACANCY
- All
- Careers
Provide administrative support to workgroup to achieve objectives. Collate and organize workgroup information. Assist in the preparation of regular scheduled reports. Coordinate meetings, organize special functions and events for workgroup. Raise purchase...
Provide administrative and technical support to workgroup to achieve objectives. Utilize the principal business processes and systems used by the workgroup. Undertake data analysis, identify and investigate variations and prepare presentations. Facilitate...
Make Flight reservations and confirmations online (International & Domestic). Management of flight tickets e.g. cancelation reschedules. Prepare daily commercial flight manifest for passengers travel the next day and prepare pickup reports based...
POSITION: HYDROCARBON FLUID ANALYST
EDUCATIONAL QUALIFICATION: A minimum of 2.1 (second class upper) with a master’s degree or first class in Petroleum Engineering, Chemical Engineering, Pure and Industrial Chemistry, or Gas Engineering.
GENERAL WORK RESPONSIBILITIES
- Oil and Gas chromatography analysis
- Flow assurance studies which include solid detection/solubility studies (asphaltene and wax precipitation onset studies, solvent titration studies, live oil titration studies, saturation pressure confirmation studies, chemical inhibition studies), asphaltene and wax content measurements, Saturates-Aromatics-Resins-Asphaltenes (SARA) group characterization of crude oil, cloud and pour point measurements.
- Surface sampling of reservoir fluids to ensure that representative samples are taken which include a surface sampling of separator oil and gas, wellhead fluid, flow line fluid, fuel and flare gas, stock tank and export fluid, formation water, etc samples
- Phase behaviour studies of reservoir fluids on bottom hole and separator samples which involves validation of surface and subsurface samples, restoration to ensure homogeneity of surface and subsurface samples, phase behaviour studies of reservoir fluids, constant-composition expansion test, differential liberation test, constant-volume depletion test, single and multi-stage separator test, atmospheric flash of sample from PVT cell to stock tank conditions to determine gas-oil ratio (GOR), formation volume factor, and shrinkage factor of the sample, hydrocarbon fluid compositional analysis using a gas chromatograph, oil-base mud contamination studies of reservoir fluid samples, live oil viscosity measurement, recombination of separator oil and gas samples to corrected field GOR or to a specified saturation pressure to produce reservoir fluid sample for reservoir condition analysis, transfer of reservoir fluid samples from samplers (MDT, RDT and RCI) to PVT piston cylinders, maintenance and calibration of DBR, Chandler and Vinci PVT cells and other laboratory equipment, water analysis
- Operation, maintenance, and calibration of PVT equipment
- Crude assay analysis: Reid vapor pressure measurement, basic sediments and water measurement, density, API and specific gravity measurements, sulfur content measurement, dead oil viscosity measurements
- Water and hydrocarbon dew point measurement of natural gas
- Detection and measurement of the quantity of contaminants in a hydrocarbon gas sample using a Drager instrument and tube
- Ensured accuracy, validity, and completeness of experimental results
- Reporting of PVT and flow assurance analysis measurements
Relevant experience may be an added advantage.
- Bachelor’s Degree in Chemistry or Chemical Engineering 1st Class or 2nd class with a master’s in the above-stated field.
- Relevant experience in Analytical Chemistry Laboratories (Preferred)
- Advanced English language skills (Required)
- Strong reasoning and mathematical skills (Required)
- Proficiency with Microsoft Office (Word, Excel, Outlook) (Required)
- Ability to lift/carry/push and/or pull upwards of 25 lbs on a frequent basis (Required)
COMPUTER SKILLS:
- Computer fundamentals, Internet Applications, Operating system of Windows, Microsoft Office Word, Excel and PowerPoint
PERSONAL PROFILE
- Effective communication in written and spoken English
- Problem-solving skills
- Time management skills
- Ability to work effectively in a team with a strong analytical mind
- Self-motivated and target-oriented
- Effective use of initiative
- Ability to work under pressure to meet challenging targets
- Physical and mental alertness
- Ability to read and write a report
- Ability to learn fast seeking continuous improvement
- A positive work attitude
- Ability to express technical information in a creative and simple manner
- High level of integrity, transparency, and respect for people
- Ability to think innovatively
Not more than 30 years of age.
Must have completed NYSC
To apply send your CV and credentials to hr@6ma.d1b.myftpupload.com
Failure to attach credentials automatically disqualifies a candidate.
Deadline: 31:10:2023
Qualification
- 10 – 15 years and above experience
- Must have IWCF and T – Bosiet
Dateline; 10th of September 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for the use of my Resume by the company.
Qualification
- 10 – 15 years and above experience
- Must have IWCF and T – Bosiet
Dateline; 10th of September 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
- 10 – 15 years and above experience
- Must have IWCF and T – Bosiet
Dateline; 10th of September 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
- 10 – 15 years and above experience
- Must have IWCF and T – Bosiet
Dateline; 10th of September 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
- 10 – 15 years and above experience
- Must have IWCF and T – Bosiet
Dateline; 10th of September 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
- 10 – 15 years and above experience
- Must have IWCF and T – Bosiet
Dateline; 10th of September 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
- 10 – 15 years and above experience
- Must have IWCF and T – Bosiet
Dateline; 10th of September 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
- 10 – 15 years and above experience
- Must have IWCF and T – Bosiet
Dateline; 10th of September 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
First degree in B.sc
A Master’s degree will be an added advantage
Dateline; 11th of August 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
First degree in B.Eng.
A Master’s degree will be an added advantage
Dateline; 11th of August 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
First degree in B.Eng.
A Master’s degree will be an added advantage
Dateline; 11th of August 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
First degree in B.Eng.
A Master’s degree will be an added advantage
Dateline; 11th of August 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
First degree in B.Eng.
A Master’s degree will be an added advantage
Dateline; 11th of August 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
First degree in B.Eng.
A Master’s degree will be an added advantage
Dateline; 11th of August 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
First degree in B.Eng.
A Master’s degree will be an added advantage
Dateline; 11th of August 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Qualification
First degree in B.Eng.
A Master’s degree will be an added advantage
Dateline; 11th of August 2023.
Send Your Cv: hr@6ma.d1b.myftpupload.com
Data Protection Clause Please consent to the use of your personal data and legal capacity to give such consent without coercion, fraud, and undue influence. Permission is given for use of my Resume by the company.
Position: Business Development/Legal Officer
Responsibilities.
- Participate in Biding and Tender preparations
- Engage in corporate registration of the company with clients. (Vendor Registration)
- To acquire new business from prospective and existing clients.
- Protect the Company’s classified information
- Defend the Company’s business policies with clients
- Maintain Company’s existing business networks and introduce new ones
- Closing new business deals and negotiating contracts.
- Prepare and make business presentations on behalf of the company
- Maintain continuous client relationships through client visits and responding to their queries.
- Prepare and review of contracts and legal agreements
- Ensure an up-to-date filing of post-incorporation documents
- Advise the company on any legal risk associated with its business.
- General Legal services
Qualification
- A Master’s degree will be an added advantage
- LLB, BL
- Minimum of 2.2
- Must have completed NYSC
- Minimum of 5 years experience
- Advance Knowledge of Computer applications eg Microsoft, Excel, PowerPoint, etc
Personal Trait expected
- Effective communication in written and spoken English
- Problem-solving skills
- Time management skills
- Ability to work effectively in a team with a strong analytical mind
- Self-motivated and target-oriented
- Effective use of initiative
- Ability to work under pressure to meet challenging targets with minimal or no supervision
- Physical and mental alertness
- Ability to read and write a report
- Ability to learn fast seeking continuous improvement
- A positive work attitude
- Ability to express technical information in a creative and simple manner
- High level of integrity, transparency, and respect for people
- Ability to think innovatively
Deadline 16th of August 2023.
Send your Cv to: hr@6ma.d1b.myftpupload.com
JOB POSITION: GAUGE ENGINEER
Overall Purpose and Objective:
To plan and execute Slickline and BHP operations as required on client installations both onshore & offshore as required and in line with Company and Client Company policies, procedures and systems, Statutory Regulations and good industry practice. To run Slickline/BHP operations, including but not limited to the supervision and training of new gauge and prospective gauge engineers
Duties, Responsibilities & Accountabilities:
- Acquisition and download of well test data
- Provide technical report on all acquired well test data
- To review well operations programmes & well files as required & to be involved with rest of the team in the planning of the operation & preparation of equipment necessary to execute a successful well intervention operation.
- Carrying out a bench test on the memory gauges prior to mobilization
- Ensure quality control of well test data for all operations
- Ensure memory gauges are calibrated and fit for use
- Provide supervision and on the job training to new gauge engineers
- Keep accurate records legible accounts of all assignment to the gauge engineer by client.
- To actively promote and comply with the Company and client HSE, operational and QA procedures and work instructions to ensure a safe and efficient operation.
- Participate in toolbox talks, risk assessments and safety meetings.
- To complete company operational reports in accordance with quality procedures, and distribute the same in a manner consistent with the client’s demands.
- Attend regular safety briefings as arranged by the Company.
- Any other delegated responsibilities as instructed by the slickline Manager within the time frame specified in a safe and efficient manner to meet business requirements provided the instruction is reasonable and you are capable and deemed competent to fulfil these.
Required Skills:
- Good knowledge & understanding of well services sector of the oil industry. Previous experience of Gauge Engineer in an operating role.
- Good all round knowledge of the entire major well service equipment manufacturers’ equipment.
- Strong communication skills – written, verbal and listening.
- Leadership skills – Interpersonal Understanding.
- Hands-on experience in one or more well service core disciplines.
- Ability to develop and energize people.
- Must have a digital marketing skill
Required Experience:
- 6+ years experience in Slickline
- Experience working with PPS 25 and PPS 28 Electronic Memory Gauges will be an asset
- Possession of valid IWCF will be an advantage
Deadline 30th of July 2023.
POSITION: PVT ENGINEER
EDUCATIONAL QUALIFICATION: A minimum of 2.1 (second class upper) with masters degree or first class honors degree in Petroleum Engineering, Chemical Engineering, Pure and Industrial Chemistry or Gas Engineering.
GENERAL WORK RESPONSIBILITIES
- Surface sampling of reservoir fluids to ensure that representative samples are taken which include surface sampling of separator oil and gas, well head fluid, flow line fluid, fuel and flare gas, stock tank and export fluid, formation water, etc samples
- Phase behaviour studies of reservoir fluids on bottom hole and separator samples which involves validation of surface and subsurface samples, restoration to ensure homogeneity of surface and subsurface samples, phase behaviour studies of reservoir fluids, constant-composition expansion test, differential liberation test, constant-volume depletion test, single and multi-stage separator test, atmospheric flash of sample from PVT cell to stock tank conditions to determine gas-oil ratio (GOR), formation volume factor, and shrinkage factor of the sample, hydrocarbon fluid compositional analysis using a gas chromatograph, oil-base mud contamination studies of reservoir fluid samples, live oil viscosity measurement, recombination of separator oil and gas samples to corrected field GOR or to a specified saturation pressure to produce reservoir fluid sample for reservoir condition analysis, transfer of reservoir fluid samples from samplers (MDT, RDT and RCI) to PVT piston cylinders, maintenance and calibration of DBR, Chandler and Vinci PVT cells and other laboratory equipment, water analysis
- Operation, maintenance, and calibration of PVT equipment
- Crude assay analysis: Reid vapour pressure measurement, basic sediments and water measurement, density, API and specific gravity measurements, sulphur content measurement, dead oil viscosity measurements
- Flow assurance studies which include solid detection/solubility studies (asphaltene and wax precipitation onset studies, solvent titration studies, live oil titration studies, saturation pressure confirmation studies, chemical inhibition studies), asphaltene and wax content measurements, Saturates-Aromatics-Resins-Asphaltenes (SARA) group characterization of crude oil, cloud and pour point measurements
- Water and hydrocarbon dew point measurement of natural gas
- Detection and measurement of the quantity of contaminants in a hydrocarbon gas sample using a Drager instrument and tube
- Ensured accuracy, validity and completeness of experimental results
- Reporting of PVT and flow assurance analysis measurements
- Preparation of validation and complete PVT report on reservoir fluid samples
- PVT simulation of fluid properties with a compositional simulator like eclipse PVT I, calsep PVTsim and PVTp by petroleum expert.
- Analysis and interpretation of PVT data
Relevant experience may be an added advantage.
COMPUTER SKILLS:
- Computer fundamentals, Internet Applications, an Operating system of Windows, Microsoft Office Word, Excel, and PowerPoint
PERSONAL PROFILE
- Effective communication in written and spoken English
- Problem-solving skills
- Time management skills
- Ability to work effectively in a team with a strong analytical mind
- Self-motivated and target-oriented
- Effective use of initiative
- Ability to work under pressure to meet challenging targets
- Physical and mental alertness
- Ability to read and write a report
- Ability to learn fast seeking continuous improvement
- A positive work attitude
- Ability to express technical information in a creative and simple manner
- High level of integrity, transparency, and respect for people
- Ability to think innovatively
Not more than 35 years of age.
Must have completed NYSC
To apply send CV and credentials to hr@6ma.d1b.myftpupload.com
Failure to attach credentials automatically disqualifies a candidate.
Deadline 30th April 2023
JOB POSITION: GAUGE ENGINEER
Overall Purpose and objective:
To plan and execute Slickline and BHP operations as required on client installations both onshore & offshore as required and in line with Company and Client Company policies, procedures and systems, Statutory Regulations, and good industry practice. To run Slickline/BHP operations, including but not limited to the supervision and training of new gauge and prospective gauge engineers
Duties, Responsibilities & Accountabilities:
- Acquisition and download of well-test data
- Provide a technical report on all acquired well test data
- To review well operations programs & well files as required & to be involved with the rest of the team in the planning of the operation & preparation of equipment necessary to execute a successful well intervention operation.
- Carrying out a bench test on the memory gauges prior to mobilization
- Ensure quality control of well test data for all operations
- Ensure memory gauges are calibrated and fit for use
- Provide supervision and on-the-job training to new gauge engineers
- Keep accurate records of legible accounts of all assignments to the gauge engineer by the client.
- To actively promote and comply with the Company and client HSE, operational, and QA procedures and work instructions to ensure a safe and efficient operation.
- Participate in toolbox talks, risk assessments, and safety meetings.
- To complete company operational reports in accordance with quality procedures, and distribute the same in a manner consistent with the client’s demands.
- Attend regular safety briefings as arranged by the Company.
- Any other delegated responsibilities as instructed by the slackline Manager within the time frame specified in a safe and efficient manner to meet business requirements provided the instruction is reasonable and you are capable and deemed competent to fulfill these.
Required Skills:
- Good knowledge & understanding of the good services sector of the oil industry. Previous experience as a Gauge Engineer in an operating role.
- Good all round knowledge of the entire major well-service equipment manufacturers’ equipment.
- Strong communication skills – written, verbal, and listening.
- Leadership skills – Interpersonal Understanding.
- Hands-on experience in one or more well-service core disciplines.
- Ability to develop and energize people.
- Must have a digital marketing skills
Required Experience:
- 6+ years experience in Slickline
- Experience working with PPS 25 and PPS 28 Electronic Memory Gauges will be an asset
- Possession of valid IWCF will be an advantage
Forward Your CV to hr@6ma.d1b.myftpupload.com
Deadline 20th April 2023.
POSITION: Laboratory Supervisor
QUALIFICATION:
B.Sc. /B.Eng. 2nd class degree honours (minimum) in Chemistry or Industrial Chemistry, Chemical Engineering or equivalents with ability to lead team members.
EXPERIENCE:
- 10 years’ experience & above
- Experience in Chemical Management System
- Experience in use of LIMS
- Evidence of training and proficiency in Oil & Gas sampling and chemical optimization
- Knowledge /Use of SAP tool as advantage
- Experience in gas Analysis using Gas Chromatograph
- Valid HUET certificate
OTHERS
- ISO 9002, ISO 14001 /JHSE-MS training and
- 3-year experience in quality/HSE systems,
- ISO 17025 training
POSITION: Production Chemist
QUALIFICATION:
B.Sc. /B.Eng. 2nd class degree honours (minimum) in Chemistry or Industrial Chemistry, Chemical Engineering or equivalents with ability to lead team members.
EXPERIENCE:
- 7 years’ experience & above
- Experience in Chemical Management System
- Experience in use of LIMS
- Evidence of training and proficiency in Oil & Gas sampling and chemical optimization
- Knowledge /Use of SAP tool as advantage
- Experience in gas Analysis using Gas Chromatograph
- Valid HUET certificate
OTHERS
- ISO 9002, ISO 14001 /JHSE-MS training and
- 3-year experience in quality/HSE systems,
- ISO 17025 training
POSITION: Production Chemist
QUALIFICATION:
B.Sc. /B.Eng. 2nd class degree honours (minimum) in Chemistry or Industrial Chemistry, Chemical Engineering or equivalents with ability to lead team members.
EXPERIENCE:
- 5 years’ experience & above
- Experience in Chemical Management System
- Experience in use of LIMS
- Evidence of training and proficiency in Oil & Gas sampling and chemical optimization
- Knowledge /Use of SAP tool as advantage
- Experience in gas Analysis using Gas Chromatograph
- Valid HUET certificate
OTHERS
- ISO 9002, ISO 14001 /JHSE-MS training and
- 3-year experience in quality/HSE systems,
- ISO 17025 training
POSITION: Production Chemist
QUALIFICATION:
B.Sc. /B.Eng. 2nd class degree honours (minimum) in Chemistry or Industrial Chemistry, Chemical Engineering or equivalents with ability to lead team members.
EXPERIENCE:
- 9 years’ experience & above
- Experience in Chemical Management System
- Experience in use of LIMS
- Evidence of training and proficiency in Oil & Gas sampling and chemical optimization
- Knowledge /Use of SAP tool as advantage
- Experience in gas Analysis using Gas Chromatograph
- Valid HUET certificate
- Conduct Gas sampling & interpretation Flow Assurance and Chemical Optimization
OTHERS
- ISO 9002, ISO 14001 /JHSE-MS training and
- 3-year experience in quality/HSE systems,
- ISO 17025 training
POSITION: Field Chemist
QUALIFICATION:
B.Sc. /B.Eng. 2nd class degree honours (minimum) in Chemistry or Industrial Chemistry, Chemical Engineering or equivalents with ability to lead team members.
EXPERIENCE:
- 4 years’ experience & above
- Experience in Chemical Management System
- Experience in use of LIMS
- Evidence of training and proficiency in Oil & Gas sampling and chemical optimization
- Knowledge /Use of SAP tool as advantage
- Experience in gas Analysis using Gas Chromatograph
- Valid HUET certificate
- Perform sampling on process streams (Crude oil, condensate, gas and produced water) and provide technical assistance on sampling
- Perform analyses of samples as recommended by reference method/standard
OTHERS
- ISO 9002, ISO 14001 /JHSE-MS training and
- 3-year experience in quality/HSE systems,
- ISO 17025 training
POSITION: Routine/ Specialized Equipment Specialist
QUALIFICATION:
BSc/B.Eng./HND in Electrical/Electronic Engineering
EXPERIENCE:
- 9 years’ experience & above
- Must have ISO 17025 awareness
- Valid HUET certificate (for swamp locations only)
- Demonstrated hands-on training on the specific equipment or those of similar principle and functioning mechanism
- To Troubleshoot and identify equipment faults
- Equipment calibration
OTHERS
- ISO 9002, ISO 14001 /JHSE-MS training and
- 3-year experience in quality/HSE systems,
- ISO 17025 training
POSITION: Equipment Service Technician
QUALIFICATION:
BSc/B.Eng./HND in Electrical/Electronic Engineering or any relevant qualification
EXPERIENCE:
- 4 years’ experience & above
- Must have ISO 17025 awareness
- Valid HUET certificate (for swamp locations only)
- Demonstrated hands-on training on the specific equipment or those of similar principle and functioning mechanism
- To Troubleshoot and identify equipment faults
- Equipment calibration
OTHERS
- ISO 9002, ISO 14001 /JHSE-MS training and
- 3-year experience in quality/HSE systems,
- ISO 17025 training
Forward Your CV to hr@6ma.d1b.myftpupload.com
Deadline 30th April 2023.
Career Opportunity in Laser Engineering: Slickline Operator
Overall Purpose and objective:
To plan and execute Slickline operations as required on client installations both on & offshore as required and in line with Company and Client Company policies, procedures and systems, Statutory Regulations, and good industry practice. To run slickline operations, including but not limited to the supervision of Junior Slickline Operators, Slickline Assistant Operators & Helpers/Interns
Duties, Responsibilities & Accountabilities:
- Carry out all aspects of slackline operation in a safe and timeous manner
- Lead crews in providing the complete range of slackline services under all operating conditions
- To review well operations programs & well files as required & to direct the team in the planning of the operation & preparation of equipment necessary to execute a successful well intervention operation.
- Checking selected equipment prior to load out
- Ensure the operation of equipment is adhered to in accordance with the company’s operating procedures
- Delegate responsibilities and tasks within the team as appropriate to team members’ competency.
- To ensure that Slickline and multi-skilled personnel under your immediate control are sufficiently trained, qualified, and experienced to carry out the work they are allocated.
- Ensure that all Slickline and associated equipment that is to be mobilized is certified and “fit for purpose”.
- To actively promote and comply with the Company and client HSE, operational, and QA procedures and work instructions to ensure a safe and efficient operation.
- Participate in toolbox talks, risk assessments, and safety meetings.
- To complete company operational reports in accordance with quality procedures, and distribute the same in a manner consistent with the client’s demands.
- Ensure that all personnel under your immediate control conduct their work in accordance with Company Client / Customer approved practices.
- Attend regular safety briefings as arranged by the Company.
- Any other delegated responsibilities as instructed by the Slickline Manager within the time frame specified in a safe and efficient manner to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.
Required Skills:
- Good knowledge & understanding of well services sector of the oil industry. Previous experience of Slickline operations in an operating role.
- Good all round knowledge of all of the major well service equipment manufacturers’ equipment.
- The practical ability to maintain the tools & equipment as required to carry out a Slickline operation on and offshore.
- Ability to manage crews & assist with the control of logistical matters for & on behalf of both Intervention Services & clients as required.
- Strong communication skills – written, verbal and listening.
- Leadership skills – Interpersonal Understanding.
- Hands-on experience in one or more well service core disciplines.
- Ability to develop and energize people.
- Must have a digital marketing skill
Required Experience:
- 6+ years experience in Slickline
- Experience working on Otis and Baker completions will be an asset
- Possession of valid IWCF will be an advantage
Forward Your CV to hr@6ma.d1b.myftpupload.com
Deadline 14th April 2023.
RECRUITMENT REQUIREMENTS
| S/N | Job Titles | key Skill & Qualification | Required Years of Experience |
General Requirements
|
| 1 | Drill Site Representative | Manage Wellsite Operations | ||
|
a
|
Senior Drilling/Work over Supervisor
|
Eng. Degree or relevant qualification & IWCF
|
Above 15 years
|
1. Having worked for a multinational, or independent or National operator or an oil and gas servicing company
2. Possession of onshore and offshore experience 3. Must have been actively involved in drilling and completion of at least 12 wells. 4. A minimum of 25% of the work experience must have been spent on active participation in Well Planning, Drilling & Completion Design 5. Relevant Safety Certification. |
| b |
Drilling
Supervisor/Superintendent |
Eng. Degree or relevant qualification & IWCF
|
Above 15 years
|
1. Having worked for a multinational, or independent or National operator or an oil and gas servicing company
2. Possession of onshore and offshore experience 3. Must have been actively involved in drilling and completion of at least 8 wells. 4. A minimum of 20% of the work experience must have been spent on active participation in Well Planning, Drilling & Completion Design |
|
c
|
Wellsite Drilling Engineer
|
Eng. Degree or relevant qualification & IWCF
|
3 to 7 years
|
1. Having worked for a multinational, or independent or National operator or an oil and gas servicing company
2. Possession of onshore and offshore experience 3. Must have been actively involved in drilling and completion of at least 4 wells. 4. A minimum of 15% of the work experience must have been spent on active participation in Well Planning, Drilling & Completion Design 5. Relevant Safety Certification. |
| 2 | Drilling Engineer | Plan & Manage Well Program | ||
|
A
|
Senior Consultant
|
Eng. Degree or relevant qualification & IWCF
|
Above 15 years
|
1. Having worked for a multinational, or independent or National operator or an oil and gas servicing company
2. Possession of onshore and offshore experience 3. Must have been actively involved in drilling and completion of at least 12 wells. 4. A minimum of 25% of the work experience must have been spent on active participation in Well Planning, Drilling & Completion Design and Well Operations Management 5.Relevant Safety Certification. |
|
b
|
Mid-level
|
Eng. Degree or relevant qualification & IWCF
|
5 to 15 years
|
1. Having worked for a multinational, or independent or National operator or an oil and gas servicing company
2. Possession of onshore and offshore experience 3. Must have been actively involved in drilling and completion of at least 8 wells. 4. A minimum of 20% of the work experience must have been spent on active participation in Well Planning & Completion Design 5.Relevant Safety Certification. |
|
C
|
Junior Consultant
|
Eng. Degree or relevant qualification & IWCF
|
2 to 5 years
|
1. Having worked for a multinational, or independent or National operator or an oil and gas servicing company
2. Possession of onshore and offshore experience 3. Must have been actively involved in drilling and completion of at least 4 wells. 4. A minimum of 15% of the work experience must have been spent on active participation in Well Planning & Completion Design 5. Relevant Safety Certification. |
| 3 | Completions Engineer | Design and Plan Completion Program | ||
|
A
|
Senior Consultant
|
Eng. Degree or relevant qualification & IWCF
|
Above 15 years
|
1. Expertise in preparing detailed Testing and Completion Programs and procedures, Preparation at Test and Completion Budgets and Authorization for Expenditure (AFEs. 2.
Possession of onshore and offshore experience. 3. Should have worked for a Multinational or Independent or National operator or Service company 4. Should be able to provide detailed scope of work for Well Completions and related services 5. Design well completions and be involved in planning, supervision and execution of completion programs on the rig (onshore or offshore) 7. Convene planning meetings such as Completing Well on Paper (CWOP) amongst others and ensure actions are taken to mitigate all risks in the program Monitor completions performance and provide benchmark statistics to ensure completions are time and cost effective 8. Visit contractor bases and ensure tool selection is correct and meets all QA/QC requirements 6. Mentor, motivates and competently develops junior technical staffs |
|
b
|
Mid-level
|
Eng. Degree or relevant qualification & IWCF
|
5 to 15 years
|
1. Should have worked for a Multinational or Independent or National operator or Service company
2. Should be able to provide detailed scope of work for completions and related services 3. Design well completions and be involved in planning, supervision and execution of completion programs on the rig (onshore or offshore) 4. Hold planning meetings, CWOP’s etc. and ensure actions are taken to mitigate all risks in the program 5. Monitor completions performance and provide benchmark statistics to ensure completions are time and cost effective 6. Visit contractor bases and ensure tool selection is correct and meets all QA/QC requirements 7. Mentor, motivates and competently develops junior technical staffs |
| c |
Junior Consultant
|
Eng. Degree or relevant qualification & IWCF
|
2 to 5 years
|
1. Should be able to participate in providing detailed scope of work for completions and related services
2. Should be able to identify well completions equipment and participate in planning and execution of completion programs on the rig (onshore or offshore) 3. Participate in CWOP and ensure actions are taken to mitigate all risks in the program 4. Monitor completions performance and provide benchmark statistics to ensure completions are time and cost effective 5. Contractor bases should be visited and ensure tool selection is correct and meets all QA/QC requirements |
| 4 | Production Operations Engineer | Production operations, & management of surface production equipment | ||
|
a
|
Senior Consultant
|
Engineering Degree or relevant qualification
|
15 years
|
1. Should have worked for a Multinational or Independent or National operator or Service company
2. Should be able to monitor production parameters and individual facilities. Make recommendations for remedial actions where anomalies are observed. 3. Provide recommendations for oil production increase through improvements in well head, choke setting, tubing size, gaslift injection rates and separator pressures 4. Provide operations input into the design of wells and completions, as well as during well clean-up operations
5. Monitor production target versus actual daily production with a view to increasing and optimising production 6. Supervises, mentors, motivates and competently develops junior technical staffs 7. |
|
B
|
Mid-level
|
Engineering degree or relevant qualification
|
5-10 years
|
1. Should have worked for a Multinational or Independent or National operator or Service company
2. Should be able to monitor production parameters and individual facilities. Make recommendations for remedial actions where anomalies are observed. 3. Provide recommendations for oil production increase through improvements in well head, choke setting, tubing size, gaslift injection rates and separator pressures 4. Provide operations input into the design of wells and completions, as well as during well |
|
clean-up operations
5. Monitor production target versus actual daily production with a view to increasing and optimizing production 6. Mentors, motivates and competently develops junior technical staffs |
||||
|
c
|
Junior Consultant
|
Engineering degree or relevant qualification
|
5 years
|
1. Should be able to monitor production parameters and individual facilities. Make recommendations for remedial actions where anomalies are observed.
2. Provide recommendations for oil production increase through improvements in well head, choke setting, tubing size, gas lift injection rates and separator pressures 3. Provide operations input into the design of wells and completions, as well as during well clean-up operations 4. Monitor production target versus actual daily production with a view to increasing and optimizing production |
| 5 | Drill Site Mud Engineer | Drilling & Completion Fluid Program & Operations | ||
|
A
|
Senior Consultant
|
Engineering degree, B.Sc. or relevant qualification & Mud School Cert
|
Above 12 years
|
1. Having worked for a multinational, or independent or National operator or an oil and gas servicing company
2. Possession of onshore and offshore experience 3. Must have been actively involved in drilling and completion of at least 12 wells. 4. A minimum of 25% of the experience must have been spent on active participation in Well Planning, Drilling & Completion Fluids Design 5. Relevant Safety Certification. |
|
b
|
Mid-level
|
Engineering degree, B.Sc. or relevant qualification & Mud School Cert
|
5 to 12 years
|
1. Having worked for a multinational, or independent or National operator or an oil and gas servicing company
2. Possession of onshore and offshore experience 3. Must have been actively involved in drilling and completion of at least 8 wells. 4. A minimum of 20% of the experience must have been spent on active participation in Well Planning, Drilling & Completion Design 5. Relevant Safety Certification. |
|
C
|
Junior Consultant
|
Engineering degree, B.Sc. or relevant qualification & Mud School Cert
|
3 to 5 years
|
1. Having worked for a multinational, or independent or National operator or an oil and gas servicing company
2. Possession of onshore and offshore experience 3. Must have been actively involved in drilling and completion of at least 4 wells. 4. A minimum of 20% of the work experience must have been spent on active participation in Well Planning, Drilling & Completion Design 5.Relevant Safety Certification. |
| 6 | Fluids Specialist | Drilling & Completion Fluid Formation and Operations | ||
|
a
|
Senior Consultant
|
Engineering degree, B.Sc. or relevant qualification & Mud School Cert
|
Above 15 years
|
1. Minimum of 15 years in fluids control
2. Prepare and review mud program and mixing plans 3. Manage the fluids systems during the operation phase. 4. Interpret data from mud property checks to evaluate treatment or action required 5. Possession of onshore and offshore experience 6. Supervise rig personnel when performing chemical additions and recording drilling fluid parameters |
| b | Mid-level | Engineering degree, B.Sc. or relevant qualification & Mud School Cert | 5 to 15 years |
1. Minimum of 5 years in fluids control
2. Review mud program to prepare orders and mixing plans 3. Interpret data from mud property checks to evaluate treatment or action required 4. Possession of onshore and offshore experience |
|
| c | Junior Consultant | Engineering degree, B.Sc. or relevant qualification & Mud School Cert | 2 to 5 years |
1.
2. 3. 4. |
Must have basic experience in fluids control Basic understanding of mud properties Ability to prepare mud orders.
Able to gather chemical or fluid samples for testing |
| 7 | Waste Management Engineer | Drilling Waste Management | |||
|
a
|
Senior Consultant
|
Engineering degree, B.Sc. or equivalent with relevant professional Qualification
|
Above 12 years
|
1.
2. 3. 4. 5. 6. 7. |
Supervise installations, operations, maintenance and demobilization of solid control/drilling waste.
Support rig surveys for equipment installation and ensures that technical recommendations, plans, cost estimates, risk analysis, schedules are fit for purpose. Provides support to the Rig Asset Management Team in the preparation of the statements of requirements (equipment, materials, personnel, services,) for projects
Prepares technical scopes to support procurement processes Coordinates the planning and execution of projects in order to ensure equipment is ready, serviced and maintained fit for purpose and in conformance with appropriate requirements for certification Provides support to the suppliers to coordinate commissioning/ decommissioning and mobilization of equipment to and from company installations. Maintains a projects documentation system. |
| b |
Mid-level
|
Engineering degree, B.Sc. or equivalent with relevant professional Qualification |
5 to 12 years
|
1.
2. 3. 4. 5. 6. 7. |
Supervise installations, operations, maintenance and demobilization of solid control/drilling waste.
Support rig surveys for equipment installation and ensures that technical recommendations, plans, cost estimates, risk analysis, schedules are fit for purpose. Provides support to the Rig Asset Management Team in the preparation of the statements of requirements (equipment, materials, personnel, services,) for projects Prepares technical scopes to support procurement processes Coordinates the planning and execution of projects in order to ensure equipment is ready, serviced and maintained fit for purpose and in conformance with appropriate requirements for certification Provides support to the suppliers to coordinate commissioning/ decommissioning and mobilization of equipment to and from company installations. Maintains a projects documentation system |
| c |
Junior Consultant
|
Engineering degree, B.Sc. or equivalent qualification |
3 to 5 years
|
1.
2. 3. |
Provide support in preparation of technical scope to support procurement process.
Must have onshore/offshore experience Maintain record of solid waste/drilling waste collection |
| 8 | Drill Site HSE Coordinator | Manage all HSSE related issues | |||
| a | Senior Consultant | Engineering degree, B.Sc. or equivalent., NEBOSH certificate/Diploma, Lead Auditor Qualifications and Environmental qualifications |
Above 12 years
|
1.
2. 3. 4. |
Performs HSE audits and inspection on and offshore, both internal and external
Review all accident/incident/near miss reports for trending and analysis Liaise with operators, governing bodies, and industry workgroup as required on HSSE related issues. Advising on all aspects of HSSE and assisting with general safety duties Preparing and documenting standards for health facilities & equipment/stores on board drilling unit 5. Full support for rig based HSE training for all workers Develop emergency plan and carry out emergency drill periodically |
| b |
Mid-level
|
Engineering degree, B.Sc. or equivalent, NEBOSH certificate/Diploma, Environmental Qualifications
|
5-12 years
|
1.Should be able to carry out the following:
Review all accidents/incidents/near miss reports for trending analysis 2.Advising on all aspects of HSSE and assisting with general safety duties 3. Preparing and documenting standards for health facilities & equipment/stores on board drilling unit. |
|
| c |
Junior Consultant
|
Engineering degree, B.Sc. or equivalent with Relevant HSSE certifications |
3-5 years
|
Must be able to report near miss incidents and all safety observations and escalate to relevant stakeholders. Must have a minimum of 3 years’ experience on upstream HSE inspections. | |
| 9 |
Material/Logistics
Coordinator- Onshore Drilling, Production and Exploration operations) |
Coordinate Wellsite Materials/Equipment & Personnel Logistics | |||
|
A
|
Senior Consultant
|
Relevant Degree or equivalent qualification with professional certification
|
Above 15 years
|
1.
2. 3. 4. 5. 6. 7. 8. 9.
10. 11.
12.
|
To effectively operate the Field Logistics activities (transportation and warehousing activities) in support of the Client’s requirements such that customer’s requirement are met and the growth of the business is enabled.
Coordinating and ensuring haulage of materials as may be required. Follow up on Material Requests from Rig(s) and ensure they are delivered timely once checks are concluded by QA/QC to prevent operational shutdown. Tracking of Call off for various Logistics activities. Responsible to optimize material storage facilities for efficient handling and cost effectiveness. Co-ordination and preparation of all materials to and from the installation. Manage the materials control Onshore and maintain relevant registers. logistics and material controlling experience, along with experience in MRP management Planning the logistics look ahead for the Onshore drilling campaign. Tracking all goods as per the company’s material management and logistics procedures. Preparation of outward goods manifests as well as dangerous goods documentation |
|
B
|
Mid-level
|
Relevant Degree or equivalent qualification with professional certification
|
5 to 15 years
|
1.
2. 3. 4. 5.
6. 7. 8. 9. |
To effectively operate the Field Logistics activities (transportation and warehousing activities) in support of the Client’s requirements such that customer’s requirement are met and the growth of the business is enabled.
Coordinating and ensuring haulage of materials as may be required. Follow up on Material Requests from Rig(s) and ensure they are delivered timely once checks are concluded by QA/QC to prevent operational shutdown. Tracking of Call off for various Logistics activities. Responsible to optimize material storage facilities for efficient handling and cost effectiveness. Co-ordination and preparation of all materials to and from the installation. Manage the materials control Onshore and maintain relevant registers. Manage logistics for materials ordered. planning the logistics look ahead for the Onshore drilling campaign. Tracking all goods as per the company’s material management and logistics procedures. Preparation of outward goods manifests as well as dangerous goods documentation
|
|
C
|
Junior Consultant
|
Relevant Degree or equivalent qualification
|
2 to 5 years
|
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. |
Coordinating and ensuring haulage of materials as may be required.
Follow up on Material Requests from Rig(s) and ensure they are delivered timely once checks are concluded by QA/QC to prevent operational shutdown. Tracking of Call off for various Logistics activities. Responsible to optimize material storage facilities for efficient handling and cost effectiveness. Preparation of all materials to and from the installation. Manage the materials control Onshore and maintain relevant registers. Manage logistics for materials ordered. Planning the logistics look ahead for the Onshore drilling campaign. Tracking all goods as per the company’s material management and logistics procedures. Preparation of outward goods manifests as well as dangerous goods documentation |
| 10 |
Material/Logistics
Coordinator- Offshore Drilling, Production and Exploration operations) |
Coordinate Offshore Materials/Equipment & Personnel Logistics | |||
| a |
Senior Consultant
|
Relevant Degree or equivalent with professional certification
|
Above 15 years
|
1.
2. 3. 4. 5. 6. 7.
8.
9.
10. 11. |
To effectively operate the Field Logistics activities (transportation and warehousing activities) in support of the Client’s requirements such that customer’s requirement are met and the growth of the business is enabled.
Coordinating and ensuring haulage of materials as may be required. Follow up on Material Requests from Rig(s) and ensure they are delivered timely once checks are concluded by QA/QC to prevent operational shutdown. Tracking of Call off for various Logistics activities. Responsible to optimize material storage facilities for efficient handling and cost effectiveness. Co-ordination and preparation of all materials to and from the installation. Manage the materials control Onshore and maintain relevant registers. Manage logistics for materials ordered. Planning the logistics look ahead for the Onshore drilling campaign. Tracking all goods as per the company’s material management and logistics procedures. Preparation of outward goods manifests as well as dangerous goods documentation |
|
b
|
Mid-level
|
Relevant Degree or equivalent with professional certification
|
5 to 15 years
|
1.
2. 3. 4. 5. 6.
7.
8. 9.
10. |
To effectively operate the Field Logistics activities (transportation and warehousing activities) in support of the Client’s requirements such that customer’s requirement are met and the growth of the business is enabled.
Coordinating and ensuring haulage of materials as may be required. Follow up on Material Requests from Rig(s) and ensure they are delivered timely once checks are concluded by QA/QC to prevent operational shutdown. Tracking of Call off for various Logistics activities. Responsible to optimize material storage facilities for efficient handling and cost effectiveness. Co-ordination and preparation of all materials to and from the installation Manage the materials control Onshore and maintain relevant registers.. Manage logistics for materials ordered. Planning the logistics look ahead for the Onshore drilling campaign. Tracking all goods as per the company’s material management and logistics procedures.
|
|
C
|
Junior Consultant
|
Relevant Degree or equivalent qualification
|
2 to 5 years
|
1. Assist in managing the materials control Onshore and maintain relevant registers.
2. Assist in managing logistics for materials ordered. 3. Planning the logistics look ahead for the Onshore drilling campaign. Tracking all goods as per the company’s material management and logistics procedures. |
| 11 | QA/QC Engineer |
Plan & Manage Equipment & Materials
QAQC |
||
|
A
|
Senior Consultant
|
Relevant Degree or equivalent qualification with professional certification
|
Above 15 years
|
Should be able to carry out the following:
1. Utilize QA principles to maintain high capacity and optimize maintenance service and other engineering processes 2. Implementation of quality control procedures 3. Review and approval of contractor’s quality documents and implement contractors audit. 4. Responsible for internal auditing and ensure projects are executed as process and procedure. 5. Conduct and participate in company’s quality or technical compliance audits for contractor, sub-contractors or vendors. 6. Closely monitor site activities, fully coordinate with project managers ona a daily basis issuing noncompliance reports in cases of noncompliance and reporting to project manager in cases of shortage of skilled labourers 7. Review contract documents for each contract stage/phase inrespect of QA/QC requirements and procedures and advise project manager on deficiencies. 8. Carry out cost and quality analysis on contract/projects. |
|
b
|
Mid-level
|
Relevant Degree or equivalent qualification with professional certification
|
5 to 15 years
|
Should be able to carry out the following:
1. Utilize QA principles to maintain high capacity and optimize maintenance service and other engineering processes 2. Conduct and participate in company’s quality or technical compliance audits for contractor, sub-contractors or vendors. 3. Closely monitor site activities, fully coordinate with project managers ona a daily basis issuing non-compliance reports in cases of non-compliance and reporting to project manager in cases of shortage of skilled labourers 4. Review contract documents for each contract stage/phase in respect of QA/QC requirements and procedures and advise project manager on deficiencies. 5. Carry out cost and quality analysis on contract/projects. |
|
c
|
Junior Consultant
|
Relevant Degree or equivalent qualification
|
2 to 5 years
|
Should be able to carry out the following:
1. Utilize QA principles to maintain high capacity and optimize maintenance service and other engineering processes 2. Conduct and participate in company’s quality or technical compliance audits for contractor, sub-contractors or vendors. 3. Formulate the Basis for all projects, Engineering designs and studies. 4. Carry out cost and quality analysis on contract/projects. |
| 12 | HSE Engineer | Manage all HHSE Related issues | |||
|
A
|
Senior Consultant
|
B.Sc. or relevant qualification, NEBOSH certificate/Diploma, Environmental Qualifications
|
15 Years and above
|
Should
1. 2. 3. 4. 5. 6. |
be able to carry out the following:
Develop a safety culture to anticipate and prevent health hazardous condition Execute environmental management processes such as chemicals and waste management and pollution prevention To implement, review, update and improve HSSE management system . To organize the company safety incentive program To organize and conduct basic firefighting training and conduct regular drill at stipulated in the drill plan Support HSSE inspections, audit and self-assessment |
|
b
|
Mid-level
|
Relevant Degree or equivalent , NEBOSH certificate/Diploma, Environmental Qualifications
|
5-7 Years
|
1.
2. 3.
|
Should be able to carry out the following activities:
To organize the company safety incentive program To organize and conduct basic firefighting training and conduct regular drill at stipulated in the drill plan Support HSSE inspections, audit and self-assessment
|
|
c
|
Junior Consultant
|
Relevant Degree or equivalent, NEBOSH certificate/Diploma, Environmental Qualifications
|
2-5 years
|
1.
2. 3. |
Should be able to carry out the following:
To organize the company safety incentive program To organize and conduct basic firefighting training and conduct regular drill at stipulated in the drill plan Support HSSE inspections, audit and self-assessment |
| 13 | Geologist | Exploration operations | |||
| a |
Senior Consultant
|
B.SC degree in Geology or relevant qualification, Various software certifications
|
15+ years |
1.. Advanced technical expertise in 3D geo-modelling is required
2. Experience in field development planning 3. Ability to perform analyses on minimal data in a variety of geological environments 4. Expert on all log and core information and integration. 5. Must be familiar with Petrel, Jewel suite, or other similar G& G software |
|
|
b
|
Mid-level
|
B.SC degree in Geology or relevant qualification, Various software certifications
|
5+ years
|
1. Advanced technical expertise in 3D geomodelling is required
2. Experience in field development planning 3. Ability to perform analyses on minimal data in a variety of geological environments 4. Expert on all log and core information and integration 5. Must be familiar with Petrel, Jewel suite, or other similar G& G software
|
|
| c | Junior Consultant | BSc. Geology or relevant qualification | 3-5 years |
1. Minimum of 3 years in the Oil and Gas industry.
2. Must have used at least one G & G software
|
|
| 14 | Contracts & Procurement Engineer | Manage all contracts and contracting activities | |||
| a |
Senior Consultant
|
Relevant Degree or equivalent qualification plus relevant Professional certification
|
15 years
|
1. Minimum of 15 years relevant oil and gas experience
2. Active participation in drafting contracts and Contracts Management 3Sound knowledge of commercial practices and good negotiation skill 4Ability to utilize specialized applicable software packages e.g. Oracle, SAP 5.Ability to maintain good working relationship with stakeholders especially industry regulatory bodies like NAPIMS & NCDMB 6. Knowledge of procurement process and life cycle 7. Knowledge of NAPIMS/NIPEX tendering process 8. Knowledge of petroleum contracting |
|
|
b
|
Mid-level
|
Relevant Degree or equivalent qualification, plus relevant Professional certification
|
5-15 years
|
1. Responsible for Contract Drafting and Management 2. Project Management skills 3. Sound knowledge of commercial practices and good negotiation skill 4. Ability to utilize specialized applicable software packages e.g. Oracle, SAP 5. .Ability to maintain good working relationship with stakeholders especially industry regulatory bodies like NAPIMS & NCDMB |
|
|
c
|
Junior Consultant
|
Relevant BSc. Degree or equivalent qualification,
|
3-5 years
|
1. Minimum of 3 years’ experience in Upstream operations
2. Ability to coordinate and prepare ITT documents, Bid evaluation 3. Basic knowledge of Procurement methods and processes 4. Good negotiation skills. |
|
| 15 | Inventory/Equipment Engineer | Plan & Manage Shore based Equipment & Materials Inventory | |||
|
a
|
Senior Consultant
|
Relevant Degree or equivalent with professional certification |
Above 15 years
|
1.
2. 3. 4. 5.
|
Should be able to carry out the following activities
Plan and execute inventory control schedules, including personnel management, from the receipt. Schedule and monitor daily inventory control Develop methods for attaining maximum efficiency in work force utilization, stockroom layout and workflow for managing inventory and products. Participate in ISO audits, manage and resolve material management, and implement associated process improvement in accordance with ISO 9001:2008 Quality Management Systems. Skills and experience in inventory management |
|
b
|
Mid-level
|
Relevant Degree or equivalent with professional certification |
5 to 15 years
|
Should be able to carry out the following activities:
1. Plan and execute inventory control schedules, including personnel management, from the receipt. 2. Monitor daily inventory control 3. Participate in ISO audits, manage and resolve material management, and implement associated process improvement in accordance with ISO 9001:2008 Quality Management Systems. |
|
|
c
|
Junior Consultant
|
Relevant Degree or equivalent with professional certification
|
2 to 5 years
|
Should be able to carry out the following activities:
1. Monitor daily inventory control 2. Participate in ISO audits, manage and resolve material 3. management, and implement associated process improvement in accordance with ISO 9001:2008 Quality Management |
|
| Systems. | ||||
| 16 | Geophysicist | Carry out subsurface studies & Formulation evaluation | ||
|
A
|
Senior Consultant
|
BSc. Geophysics or relevant qualifications
|
Above 15 years
|
1. Vast experience working with multinational, or independent or National operator or an oil and gas servicing company
2. Possession of relevant onshore and offshore experience in the entire oil and gas value chain 3.Above 15 years’ experience in seismic evaluation and related activities in an active E&P operating company. 4 Excellent technical, communication, management, mentoring and leadership skills with a strong emphasis on teamwork 5. Self-starter with a lot of energy/initiative. Accurate and reliable worker with high degree of achievement drive, good presentation and communication skills 6.Ability to maintain good working relationship with stakeholders especially industry regulatory bodies like NAPIMS & DPR |
|
b
|
Mid-level
|
BSc. Geophysics or relevant qualifications
|
5 to 15 years
|
1 Experience in seismic evaluation or related activities in an active E&P operating company. 2 Workstation-based seismic /geological interpretation on both play and prospect scales 3 Well-rounded geoscientist experienced in all aspects of play-based evaluation concepts and methods 4 Ability to rapidly analyze and identify critical success factors and risk elements, then to focus on these to efficiently develop the opportunity 5 Strong inter-personal skills: coaching, mentorship, communication, leadership and team playing skills 6 Self-starter with a lot of energy/initiative. Accurate and reliable worker with high degree of achievement drive, good presentation and communication skills 7 Senior explorationist in the team with highly developed technical skills. Capable of standing in for team leader
|
|
c
|
Junior Consultant
|
BSc. Geophysics or relevant qualifications
|
2-5 years
|
1 Experience in seismic evaluation or related activities in an active E&P operating company.
2 Workstation-based seismic /geological interpretation on both play and prospect scales 3Geosciences experience in all aspects of play-based evaluation concepts and methods 4 Ability to rapidly analyze and identify critical success factors and risk elements, then to focus on these to efficiently develop the opportunity 5 Strong inter-personal skills: mentorship, communication and team playing skills |
| 17 | Seismologist | Carry out Seismic and subsurface studies | ||
|
A
|
Senior Consultant
|
B.Sc. Geology/Geophysics or relevant qualifications with other relevant Certifications
|
10-15years
|
1. Must be able to apply HSE policies for Geophysical operations
2. Candidate must have good knowledge in modern practices and developments in. Geophysical operation in the Niger Delta region 3. Possess a Working knowledge of various statutory regulations applicable to Geophysical operations |
|
B
|
Mid-level
|
B.Sc. Geology/Geophysics or relevant qualifications
|
5-10 years
|
1. He/she must possess sound contract management skills.
2. The job holder must have good knowledge in modern practices and developments in Geophysical operation in the Niger Delta region. |
| 3. Possess a Working knowledge of various statutory regulations applicable to Geophysical operations | ||||
| c | Junior Consultant | B.Sc. Geology/Geophysics or relevant qualifications | 3-5 years | The job holder will have sound IT System awareness including the use of spreadsheet and database applications. |
| 18 |
Technical & Admin
Assistant |
Responsible for Technical Support/ Assistant Services | ||
| a | Technical & Admin Assistant |
Relevant BSc. Degree or equivalent qualification
|
3to 5 years
|
1. Ability to provide technical support for Company’s staff 2. Sound IT System awareness including the use of excel spreadsheet and other Microsoft office tools 3. Collation of technical presentations for 3rd Party/ Regulatory meetings 4. Document dispatch and receipt 5. Custodian of technical library 6. Preparing minutes and agendas of meetings 7. Interface between technical and commercial team 8. Possess excellent writing, organizational skills and 9. communication capabilities • 10. Ability to multitask and prioritize using good time management skills |
| 19 | Legal Officer | Responsible for all Legal matters | ||
| a |
Senior Consultant
|
LLB, BL or relevant qualifications
|
15 years
|
1. Having worked as a qualified lawyer in a corporate law firm or oil and gas related company
2. A minimum of 15 years post call work experience must have been spent on active participation in upstream, commercial and/or corporate law. 3. A Master’s degree in oil and gas and/or other relevant legal Certifications is an added advantage |
| b |
Mid-level
|
LLB, BL or relevant qualifications
|
5-10 years
|
1. Having worked as a qualified lawyer in a corporate law firm or oil and gas related company
2. A minimum of 5-10 years post call work experience must have been spent on active participation in upstream, commercial and/or corporate law. 3. A Master’s degree in oil and gas and/or other relevant legal Certifications is an added advantage |
| c | Junior Consultant |
LLB, BL or relevant qualifications
|
2-5 years
|
1. Having worked as a qualified lawyer in a corporate law firm or oil and gas related company
2. A minimum of 2-3 year post call work experience must have been spent on active participation in upstream, commercial and/or corporate law. |
| 20 | Field Seismic QA/QC Engineer | Responsible for geophysical operations | ||
|
a
|
Senior Consultant
|
Relevant Degree or equivalent with professional certification
|
Above 10 years
|
1. Must be able to apply HSE policies for Geophysical operations.
2. Ability to provide technical and operational program assurance for seismic surveys 3. The job holder must have good knowledge in modern practices and developments in Geophysical operation in the Niger Delta region 4. Possess a Working knowledge of various statutory regulations applicable to Geophysical operations 5. Ensure fulfillment of the technical and operational requirements of the seismic program and report on crew activities 6. Experience in Marine Seismic operations, techniques, equipment and positioning with a valid Sea Survival and Medical Certificate |
| b | Mid-level |
Relevant Degree or equivalent with professional certification
|
5-10 years
|
1. He/she must possess sound contract management skills. 2. The job holder must have good knowledge in modern practices and developments in Geophysical operation in the Niger Delta region. 3. Possess a Working knowledge of various statutory regulations applicable to Geophysical operations |
| c | Junior Consultant | Relevant Degree or equivalent qualification |
2 to 5 years |
The job holder will have sound IT System awareness including the use of spreadsheet and database applications. |
| 21 | Civil Engineer | Manage all civil engineering/facility infrastructure operations | ||
| a | Senior Consultant |
B.Eng. or relevant qualification and COREN
|
Above 15years
|
1.Manage all civil Engineering/facility infrastructure operations (onshore, Swamp and off shore): including: FEED, contracts monitoring and control, project implementation, coordination of meetings with contractors, regulators and other E&P operators (if any), approval/certification of IPC and WCC.
2. Must be proficient in the use of Microsoft applications (word, excel, power point etc.), AutoCAD, MS -Projects, structural detailing. |
|
b
|
Mid-level
|
B.Eng. or relevant qualification and COREN
|
10-15 years
|
1.Responsible for Technical Administration of projects, FEED, supervision of contractors/sub-contractors on site, implementation/coordination of direct labour works, material testing and utilization, issuance of certificates of payment. To contractors, coordination of surveyors and chain-men.
2. Must be proficient in Microsoft applications (word, excel, power point etc), AutoCAD, MS-Projects, structural detailing. 3. Should be able to use surveying tools such as leveling instrument, tapes etc, and should be able to work with little or no supervision. 4. |
|
c
|
Junior Consultant
|
B. Eng or relevant qualifications
|
5-10 years
|
1.Responsible for Technical Administration of projects, FEED, Coordination of site meetings including safety PEP and tool box meetings, day to day reporting of project progress, material testing and utilization and documentation .
2. Must be proficient in Microsoft applications (word, excel, power point etc.), AutoCAD, MS -Projects, structural detailing and should be able to work with minimal supervision. |
| 22 |
Marine
Superintendent/Supervisor (Logistics) |
Plan & Manage Marine Logistics Operations | ||
|
a
|
Senior Consultant
|
First degree or relevant qualification in
Engineering, Sciences or any technical relevant discipline, Relevant marine certifications
|
Above 15 years
|
1. Ensure that all marine operations are conducted in a safe and environmentally aware manner, consistent with industry standards (MARPOL, SOLAS, ISGOTT, OCIMF etc.), by offload tankers at the terminal, supply vessels, tugs, work boats and other marine vessels operating within the Client’s offshore facilities.
2. Assist in review, oversight and periodical audits of the performance, suitability, sustainability, regulatory performance, and quality standards of all marine vessels operating within the Client’s offshore facilities. 3. Ensure all marine contingency, emergency response and crisis management plans are current and exercised regularly. |
|
4. Monitor mooring operations and performance of export offload tankers in line with Charter Party terms and conditions. Ensure compliance with Terminal operating requirements for offload tankers and also ensure that the Ship Shore Safety checklist is properly completed and maintained throughout the loading period. Observe offload tanker operations and ensure prompt vessel turnaround in order to minimise likelihood of demurrage.
5. Review and certify suitability of all vessels nominated for fuel bunkering at the terminal. 6. Plan and schedule timely delivery of bunkers to the FPSO to ensure that sufficient stocks are available. 7. Investigate and provide report on all marine accidents, incidents and ‘near misses’ within the Client’s offshore facilities. 8. Ensure procedures for all Export tanker operations and marine vessel operations are adhered to. Through continuous review and updating of procedures, legislations and technology etc. drive efficiencies and safety improvement in operations
|
||||
|
b
|
Mid-level
|
First degree or relevant qualification in Engineering, sciences or any technical relevant discipline, Relevant marine certifications
|
5 to 15 years
|
1. Assist in review, oversight and periodical audits of the performance, suitability, sustainability, regulatory performance, and quality standards of all marine vessels operating within the Client’s offshore facilities.
2. Ensure all marine contingency, emergency response and crisis management plans are current and exercised regularly. 3. Monitor mooring operations and performance of export offload tankers in line with Charter Party terms and conditions. Ensure compliance with Terminal operating requirements for offload tankers and also ensure that the Ship Shore Safety checklist is properly completed and maintained throughout the loading period. Observe offload tanker operations and ensure prompt vessel turnaround in order to minimise likelihood of demurrage. 4.Review and certify suitability of all vessels nominated for fuel bunkering at the terminal |
| c |
Junior Consultant
|
Relevant first degree or equivalent qualification
|
3 3to 5 years
|
1. Ensure all marine contingency, emergency response and crisis management plans are current and exercised regularly.
|
| 23 | Barge Master | Manage marine and barge operations | ||
|
a
|
Senior Consultant
|
Relevant first degree or equivalent qualification
|
Above 15 years
|
1.Monitor the weather conditions and rig motions
2. Advise OIM on conditions likely to affect drilling operations and seaworthiness of the rig. 3. Ensure that accurate calculation of load distribution and weights for daily stability reports and lightship are maintained. Authority 4. Coordinate all helicopter and supply boats traffic – supervise movement of materials and personnel to and from the rig 5. Ensure that cranes are in safe working condition. |
| 6. Ensure all lifting gears are inspected and certified, correctly color coded, maintained, and stowed properly. | ||||
| b | Mid-level |
Relevant first degree or equivalent qualification
|
4 5to 15 years
|
1. Ensure that accurate calculation of load distribution and weights for daily stability reports and lightship are maintained. Authority
2. Coordinate all helicopter and supply boats traffic – supervise movement of materials and personnel to and from the rig 3. Ensure that cranes are in safe working condition |
| c | Junior Consultant | Relevant first degree or equivalent qualification | 2 to 5 years | Assist in the coordination of all helicopter and supply boat traffic |
| 24 | Reservoir Engineer | Carry out reserve management | ||
|
a
|
Senior Consultant
|
Degree in a Geoscience/Petroleum Engineering or relevant qualification
|
15 years and above
|
1. Should have worked for a Multinational or Independent or National operator or an oil servicing company
2. Should have advanced skills in analytical reservoir engineering techniques and be able to apply them to existing and new field development 3. Should possess strong understanding of reservoir engineering modelling with both numerical analysis and material balance. Conduct history matching to validate reservoir models 4. Should be experienced in reserves classification, evaluation and should be able to take lead role in official reporting end of year reserves 5. Should have experience in the design of fluid sampling programs in conjunction with vendors. Should be able to monitor third party PVT analysis, validate and approve 6. Should have experience with the design, interpretation and analysis of DST/RFT/MDT programs 7. Should be able to provide short term, medium term and long term production forecasts 8. Supervises, mentors, motivates and competently develops junior technical staffs |
|
b
|
Mid-level
|
Degree in a Geoscience/Petroleum Engineering or relevant qualification |
5years to 10 years
|
1. Should have worked for a Multinational or Independent or National operator or an oil servicing company
2. Should have skills in analytical reservoir engineering techniques and be able to apply them to existing and new field development 3. Ability to understand reservoir engineering modelling with both numerical analysis and material balance. Conduct history matching to validate reservoir models 4. Proficient working knowledge and use of OFM, well testing, PVT and numerical simulation software is required 5. Should be able to direct surveillance activities, MER testing, BHP surveys in line Government statutory regulations 6. Should be able to provide short term, medium term and long term production forecasts 7. Mentors, motivates and competently develops junior technical staffs |
|
c
|
Junior Consultant
|
Degree in a Geoscience/Petroleum Engineering or relevant qualification |
5years
|
1. Should be able to collate technical data and interpret with recommendations 2. Working Knowledge of material balance, OFM, well testing, PVT and numerical simulation software expertise
3. Should be able to provide reservoir engineering input into ATDs 4. Should be able to provide support during MER testing, BHP campaigns and interpretation of data |
| 25 | Petroleum Engineer | Carry out field development, reservoir management and Formation studies | ||
|
a
|
Senior Consultant
|
Degree in a Geoscience/Petroleum Engineering or relevant qualification
|
15 years
|
1. Should have worked for a Multinational or Independent or National operator or an oil servicing company
2. Should have advanced skills in analytical reservoir engineering techniques and be able to apply them to existing and new field development 3. Should actively be involved in monitoring well performance data. Should be able to take a lead in production problem diagnosis, well performance monitoring and optimisation of well throughput 4. Should possess strong understanding of reservoir engineering modelling with both numerical analysis and material balance. Conduct history matching to validate reservoir models 5. Initiate and participate in the design and programming of well completions, with the aim of optimizing well inflow performance and maximizing recoverable reserves 6. Should have an excellent understanding of PVT analysis 7. Should be experienced in reserves classification , evaluation and should be able to take lead role in official reporting end of year reserves 8. Should have experience in the design of fluid sampling programs in conjunction with vendors. Should be able to monitor third party PVT analysis, validate and approve 9. Should be able use proficiently performance simulation softwares to optimize inflow and outflow performance, gaslift applications, completion design, tubular selection for new wells and identify work over candidates 10. Should have experience with the design, interpretation and analysis of DST/RFT/MDT programs 11. Should have a good knowledge of heavy oil production and also good understanding of sand control 11. Should be able to provide short term, medium term and long term production forecasts 12. Supervises, mentors, motivates and competently develops junior technical staffs and directs Field Operations where necessary |
|
b
|
Mid-level
|
Degree in a Geoscience/Petroleum Engineering or relevant qualification |
5-15 Years
|
1. Should have worked for a Multinational or Independent or National operator or an oil servicing company
2. Should actively be involved in monitoring well performance data. Should be able to initiate production problem diagnosis, well performance monitoring and optimisation of well throughput 3. Should have skills in analytical reservoir engineering techniques and be able to apply them to existing and new field development 4. Ability to understand reservoir engineering modelling with both numerical analysis and material balance. Conduct history matching to validate reservoir models 5. Should have an excellent knowledge of gas lift operations and be able to design, operate and optimise a gas lift system 6. Should be able use proficiently performance simulation softwares to optimize inflow and outflow performance, gas lift applications, completion design, tubular selection for new wells and identify work over candidates 7. Initiate and participate in the design and programming of well completions, with the aim of optimizing well inflow performance and maximizing recoverable reserves |
| 8. | Proficient working knowledge and use of OFM, well testing, PVT and numerical simulation softwares is required | ||||
| 9. | Should be able to direct surveillance activities, MER testing, BHP surveys in line Government statutory regulations | ||||
| 10. |
Should have experience with the design, interpretation and analysis of
DST/RFT/MDT programs |
||||
| 11. | Should have a good knowledge of heavy oil production and also good understanding of sand control | ||||
| 12. | Should be able to provide short term, medium term and long term production forecasts | ||||
|
13.
|
Mentors, motivates and competently develops junior technical staffs and directs Field Operations where necessary | ||||
|
c
|
Junior Consultant
|
Degree in a Geoscience/Petroleum Engineering or relevant qualification |
0-5 Years
|
1.
2. 3. 4. 5. 6. 7. 8. |
Should be able to collate technical data and interprete with recommendations Should be actively involved in collating and monitoring well performance data. Should be able to carry out production problem diagnosis and remedies, well performance monitoring and optimisation of well throughput
Working Knowledge of material balance, OFM, well testing, PVT and numerical simulation software expertise is required Should be able to provide reservoir engineering input into Application to Drill and Application to Complete Should be able to provide support during MER testing, BHP campaigns and interpretation of data Should have knowledge of gas lift operations and be able to design, operate and optimise a gaslift system Some knowledge of sand control will be expected |
| 26 | Security Consultant | Manage security affairs | |||
|
A
|
Senior Consultant
|
Relevant degree or equivalent and related Security Certifications
|
15 years and above
|
1.
2. 3. 4. 5.
|
Rapidly analyze security project requirement for completing work.
Evidence of previous experience showing ability to supervise a security team. Must be able to make procedural recommendations for improvement in security posture. Participate in internal risk management committee meetings. Write and review detail security risk and controls assessment with daily security test report |
|
b
|
Mid-level
|
Relevant degree or equivalent and related Security Certifications
|
5-15 years
|
1.
2. 3. 4. 5.
|
Rapidly analyze security project requirement for completing work.
Evidence of previous experience showing ability to supervise a security team. Must be able to make procedural recommendations for improvement in security posture. Participate in internal risk management committee meetings. Write and review detail security risk and controls assessment with daily security test report |
| c | Junior Consultant | Relevant degree or equivalent and related Security Certifications | 2-5 years | Must be able to prepare daily security reports. | |
| 27 |
Community Relations
Officer |
Manage community relation activities | |||
| a | Community Relations Officer | Relevant degree or equivalent | 0-5 years | 1To support in developing and driving a strategy for strong relationship with host communities | |
|
2. To anticipate and report on any local environments issues that may impact on the company s business.
3. To insure ethical compliance of all company/projects actions in the environments. 4. To strictly follow up internal or clients communities’ guidelines. 5. Track, update and report performance on annual community engagement programs 6. Prepare community engagement budget and performance metrics. |
||||
| 28 | Community Liaison Officer | Manage community relationship | ||
|
a
|
Community Liaison Officer
|
Relevant degree or equivalent
|
0-5 years
|
1. To intervene and defend company s interests in cases of disputes and / or claims in the said environments as per management/legal dept. guideline.
2. To insure ethical compliance of all company/projects actions in the environments.3. To liaise and coordinate meetings in relation with above described environments as per management and projects guidelines. 4. To anticipate and report on any local environments issues. 5. Manage (To solve) Community Liaison issues & Public relations matters 6. To relate with Local and States Governments representatives 7. To manage expectations of Communities Representatives. 8. To relate with and attend to issues raised by CLOs/PROs 9 Manage Local and States Governments representatives this is already stated above 10. To establish and maintain relationship with Traditional Rulers and communities representatives. 11. To manage expectations of indigenous content contractors |
| 29 | Production Technologist | Carryout completion program and production operation | ||
|
A
|
Senior Consultant
|
Relevant Engineering degree or equivalent & related professional certification
|
Above 10 years
|
1. Should have worked for a Multinational or Independent or National operator or an oil servicing company
2. Should actively be involved in monitoring well performance data. Should be able to take a lead in production problem diagnosis, well performance monitoring and optimization of well throughput 3. Should have an excellent knowledge of gas lift operations and be able to design, operate and optimize a gas lift system 4. Should be able use proficiently performance simulation software to optimize inflow and outflow performance, gas lift applications, completion design, tubular selection for new wells and work over candidates 5. Initiate and participate in the design and programming of well completions, with the aim of optimizing well inflow performance and maximizing recoverable reserves 6. Should have an excellent understanding of PVT analysis 7. Should have an excellent understanding in the area of sand control 8. Knowledge of heavy oil production 9. Supervises, mentors, motivates and competently develops junior technical staffs |
|
b
|
Mid-level
|
Relevant Engineering degree or equivalent
|
5-10 years
|
1. Should have worked for a Multinational or Independent or National operator or an oil servicing company
2. Should actively be involved in monitoring well performance data. Should be able to take to initiate production problem diagnosis, well performance monitoring and optimization of well throughput 3. Should have an excellent knowledge of gas lift operations and be able to design, operate and optimize a gas lift system 4. Should be able use proficiently performance simulation software to optimize inflow and |
|
outflow performance, gas lift applications, completion design, tubular selection for new wells and work over candidates
5. Initiate and participate in the design and programming of well completions, with the aim of optimizing well inflow performance and maximizing recoverable reserves 6. Should have an excellent understanding of PVT analysis 7. Should have an excellent understanding in the area of sand control 8. Knowledge of heavy oil production 9. Mentors, motivates and competently develops junior technical staffs |
||||
|
c
|
Junior Consultant
|
Relevant Engineering degree or equivalent
|
3-5 years
|
1. Should be actively involved in collating and monitoring well performance data. Should be able to identify production problem diagnosis, well performance monitoring and optimization of well throughput
2. Should have knowledge of gas lift operations and be able to design, operate and optimize a gas lift system 3. Should be able to use performance simulation software to optimize inflow and outflow performance 4. Should have an understanding of PVT analysis 5. Should have understanding in the area of sand control |
| 30 |
Production
Chemist/Technician |
Carryout chemical analysis for production operations | ||
|
A
|
Senior Consultant
|
Relevant Engineering degree or equivalent & related professional certification
|
Above 10 years
|
1. Should have in-depth oil and gas operational knowledge of multiphase separation, formation and well chemistry, field chemistry, process systems and challenges, solids characterization, water treatment and water injections.
2. Coordinate, supervise and support activity across the asset and secure cross learning 3. Carry out laboratory test to produce chemicals according to established standards and guidelines 4. Develop and monitor production plan 5. Follow safety and equipment operation process 6. Develop standard procedures to improve quality and efficiency 7. Liaise with external laboratory for confirmatory test on crude assay, gas, water grain distribution analysis |
|
b
|
Mid-level
|
Relevant Engineering degree or equivalent
|
5-10 years
|
1. Should have in-depth oil and gas operational knowledge of multiphase separation, formation and well chemistry, field chemistry, process systems and challenges, solids characterization, water treatment and water injections.
2. Carry out laboratory test to produce chemicals according to established standards and |
|
guidelines
3. Develop and monitor production plan 4. Follow safety and equipment operation process 5. Liaise with external laboratory for confirmatory test on crude assay, gas, water grain distribution analysis |
||||
|
C
|
Junior Consultant
|
Relevant Engineering degree or equivalent
|
3-5 years
|
1. Should be able to handle laboratory equipment safely and effectively
2. Monitor and report progress of analytical tests to Supervisor on a regular basis 3. Document laboratory activities for reference purposes 4. Carry out laboratory test to produce chemicals according to established standards and guidelines 5. Carry out field analysis and maintain MSDS of chemical products on locations 6. Liaise with external laboratory for confirmatory test on crude assay, gas, water grain distribution analysis |
| 31 | Facility Engineers- Electrical and Instrumentation | Carryout facility engineering services | ||
|
a
|
Senior Consultant
|
Relevant Engineering degree or equivalent &
COREN
|
15 years
|
Should be able to carry out the following:
1. Performs preventive and corrective maintenance of test apparatus and peripheral equipment 2. Installs or directs technical personnel in installation of unit in test chamber or other test facility 3. Sketches and builds or modifies jigs, fixtures, and instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel 4. Analyzes and converts test data to usable form, using mathematical formulas, and prepares graphs and written reports to translate test results. |
|
b
|
Mid-level
|
Relevant Engineering degree or equivalent
|
10 years
|
Should be able to carry out the following,
1. Performs preventive and corrective maintenance of test apparatus and peripheral equipment 2. Installs or directs technical personnel in installation of unit in test chamber or other test facility 3. Sketches and builds or modifies jigs, fixtures, and instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel 4. Analyzes and converts test data to usable form, using mathematical formulas, and |
| prepares graphs and written reports to translate test results. | ||||
|
c
|
Junior Consultant
|
Relevant Engineering degree or equivalent
|
5 years
|
Should be able to carry out the following:
1. Performs preventive and corrective maintenance of test apparatus and peripheral equipment 2. Installs or directs technical personnel in installation of unit in test chamber or other test facility 3. Sketches and builds or modifies jigs, fixtures, and instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel 4. Analyzes and converts test data to usable form, using mathematical formulas, and prepares graphs and written reports to translate test results. |
| 32 |
Facility Engineer-
Mechanical and Material |
Provide facility engineering services | ||
|
a
|
Senior Consultant
|
Relevant Engineering degree & COREN
|
15 years
|
Should be able to carry out the following:
1. Performs preventive and corrective maintenance of test apparatus and peripheral equipment 2. Installs or directs technical personnel in installation of unit in test chamber or other test facility 3. Sketches and builds or modifies jigs, fixtures, and instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel 4. Analyzes and converts test data to usable form, using mathematical formulas, and prepares graphs and written reports to translate test results. |
|
b
|
Mid-level
|
Relevant Engineering degree or equivalent
|
10 years
|
Should be able to carry out the following:
1. Performs preventive and corrective maintenance of test apparatus and peripheral equipment 2. Installs or directs technical personnel in installation of unit in test chamber or other test facility 3. Sketches and builds or modifies jigs, fixtures, and instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel 4. Analyzes and converts test data to usable form, using mathematical formulas, and prepares graphs and written reports to translate test results. |
|
c
|
Junior Consultant
|
Relevant Engineering degree or equivalent
|
5 years
|
Should be able to carry out the following:
1. Performs preventive and corrective maintenance of test apparatus and peripheral equipment 2. Installs or directs technical personnel in installation of unit in test chamber or other test facility 3. Sketches and builds or modifies jigs, fixtures, and instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel 4. Analyzes and converts test data to usable form, using mathematical formulas, and prepares graphs and written reports to translate test results. |
| 33 | Insurance Officer | Manage all Insurance concerns | ||
|
A
|
Senior Consultant
|
Minimum of BSc or HND Insurance
|
15 years
|
1. Understanding of the local and international insurance market
2. Active participation in acquisition of Well Insurance Packages 3. Negotiation skills |
|
b
|
Mid-level
|
Minimum of BSc or HND Insurance
|
10 years
|
1. Understanding of the local and international insurance market
2. Active participation in acquisition of Well Insurance Packages 3. Negotiation skills |
|
C
|
Junior Consultant
|
Minimum of BSc or HND Insurance
|
5 years
|
1. Understanding of the local and international insurance market
2. Active participation in acquisition of Well Insurance Packages 3. Negotiation skills |
| 34 | Cost Engineer | Project Budgeting & Cost Monitoring | ||
| a | Senior Consultant | BSc or equivalent qualifications and related professional certifications |
15 years
|
1. Review Authorization for Expenditure (AFE) and all three (3) level Cost Estimates 2. Cognate experience in monitoring and managing operational costs for projects.
3. Reporting of all operational costs. |
| b |
Mid-level
|
BSc or equivalent qualifications and related professional certifications
|
5to 15 years
|
1. Ability to prepare Authorization for Expenditure (AFE) and all three (3) level Cost Estimates
2. Cognate experience in managing operational costs for projects. 3. Reporting of all operational costs. |
|
c
|
Junior Consultant
|
BSc or equivalent qualifications
|
3 2to 5 years
|
1. Ability to prepare Authorization for Expenditure (AFE) and all three (3) level Cost Estimates
2. Cognate experience in managing operational costs for projects. 3. Reporting of all operational costs. |
| 35 | Wellsite Geologist | Manage Wellsite Geology Operations | ||
|
A
|
Senior Consultant
|
B.Sc degree in Geology or equivalent qualification
|
15 years
|
1. Must have worked on onshore and offshore rigs 2. Must have acquired 15 years’ experience on geological wellsite duties of an oil rig 3. Have experience in Mudlogging, MWD/LWD, Wireline, Coring and Formation Pressure testing 4. Ability to analyze, evaluate and describe formation while drilling using cuttings, gas, LWD and Wireline data 5. Knowledge of Pore pressure and Fracture gradient evaluation 6. Possess the ability to represent the onshore G & G team by reporting to the Senior Operations Geologist in Lagos. 7. Must be able to correlate geological data with offset wells and identify target formations, horizons and total depth for all well sections 8. Ability to safe guard the collection, storage and transmission of information and reports at the wellsite to head office 9. Must possess relevant Safety Certification (BOSIET, HUET, SAS, and Firefighting etc.). |
|
b
|
Mid-level
|
B.Sc degree in Geology or equivalent qualification
|
5 to 15 years
|
1. Must have worked on onshore and offshore rigs 2. Must have acquired between 5 and 15 years’ experience on geological wellsite duties of an oil rig 3. Have experience in Mudlogging, MWD/LWD, Wireline, Coring and Formation Pressure testing |
|
4. Ability to analyze, evaluate and describe formation while drilling using cuttings, gas, LWD and Wireline data
5. Knowledge of Pore pressure and Fracture gradient evaluation 6. Possess the ability to represent the onshore G & G team by reporting to the Senior Operations Geologist in Lagos. 7. Must be able to correlate geological data with offset wells and identify target formations, horizons and total depth for all well sections 8. Ability to safe guard the collection, storage and transmission of information and reports at the wellsite to head office 9. Must possess relevant Safety Certification (BOSIET, HUET, SAS, Firefighting etc.). |
||||
|
c
|
Junior Consultant
|
BSc. Geology or equivalent
|
2 to 5 years
|
1. Must have oil and gas experience
2. Must be able to correlate geological data with offset wells and identify target 3. Must possess relevant safety certifications |
| 36 | Seismic / Rock Petrophysicist | Carryout geophysical operations | ||
|
A
|
Senior Consultant
|
BSc. Geology or Geophysics or equivalent qualification and Certification in Seismic data interpretation
|
Above 15yrs
|
The Consultant Rock-Physicist & QI Geophysicist must have worked in similar capacity in an IoC or a reputable Service Company as an AVO / Inversion Specialist and apt in the use of Time and Depth Seismic Data. Must also have detailed reservoir characterization projects experience. The Consultant must also have skills integrate able with Petro physicists, Geoscientists and Reservoir
Engineers in the with the view to having a robust static and dynamic models. |
|
b
|
Mid-level
|
BSc. Geology or Geophysics or equivalent qualification
|
5 5to 15 years
6
|
The Consultant Rock-Physicist & QI Geophysicist must have worked in similar capacity in an IoC or a reputable Service Company as an AVO / Inversion Specialist and apt in the use of Time and Depth Seismic Data. Must also have detailed reservoir characterization projects experience. The Consultant must also have skills integrate able with Petro physicists, Geoscientists and Reservoir Engineers in the with the view to having a robust static and dynamic models. |
indicate the positions for which you are applying and also sign your CV.
ALL CVS AND CREDENTIALS SHOULD BE FORWARDED TO:
hr@6ma.d1b.myftpupload.com
Deadline: 01:02: 2023
QUALIFICATION:
B.SC ACCOUNTING (ACA is a very strong advantage)
OTHER REQUIREMENTS:
- Proficient in the Use of Accounting Software (SAGE ONE an Added Advantage)
- Compent use of MS Excel, Power Point and Microsoft Office
- Very Vast Knowledge of both Direct and indirect Taxes (VAT, WHT etc)
- Knowledgeable on management and treatment of fixed asset
- Ability to prepare Financial Report
PERSONAL TRAITS:
- Ability to work under little or no Supervision
- Ability to work under Pressure
- Team player
- Sound Analytical Reasoning
- Self Driven and Result Oriented
- Willingness to take up challenges
- Ability to meet deadlines
Additional requirement: must not be more than 35 years.
ALL CV AND CREDENTIALS SHOULD BE FORWARDED TO:
hr@6ma.d1b.myftpupload.com
Deadline: 29th of July 2021.
QUALIFICATION:
B.SC ACCOUNTING (ACA is a very strong advantage)
OTHER REQUIREMENTS:
- Proficient in the Use of Accounting Software (SAGE ONE an Added Advantage)
- Compent use of MS Excel, Power Point and Microsoft Office
- Very Vast Knowledge of both Direct and indirect Taxes (VAT, WHT etc)
- Knowledgeable on management and treatment of fixed asset
- Ability to prepare Financial Report
PERSONAL TRAITS:
- Ability to work under little or no Supervision
- Ability to work under Pressure
- Team player
- Sound Analytical Reasoning
- Self Driven and Result Oriented
- Willingness to take up challenges
- Ability to meet deadlines
Additional requirement: must not be more than 35 years.
ALL CV AND CREDENTIALS SHOULD BE FORWARDED TO:
hr@6ma.d1b.myftpupload.com
Deadline: 29th of July 2021.
RECRUITMENT REQUIREMENTS
A. Drill Site Representative
- Job Position: Senior Drilling/Workover Supervisor
Expectation:
- Having worked for a multinational, independent or National operator or an oil and gas servicing company
- Possession of onshore and offshore experience
3. Must have been actively involved in the drilling and completion of at least 12 wells.
4. A minimum of 25% of the work experience must have been spent on active participation in Well Planning, Drilling & Completion Design
5. Relevant Safety Certification.
Required Years of Experience: Above 15yrs.
Qualification: Eng. Degree or relevant qualification & IWCF
2. Job Position: Drilling Supervisor/Superintendent
Expectation:
-
- Having worked for a multinational, independent, or National operator or an oil and gas servicing company
- Possession of onshore and offshore experience
- Must have been actively involved in drilling and completion of at least 8 w
4. A minimum of 20% of the work experience must have been spent on active participation in Well Planning, Drilling & Completion Design
Required Years of Experience: Above 15yrs.
Qualification: Eng. Degree or relevant qualification & IWCF
3. Job Position: Wellsite Drilling Engineer
Expectation:
-
- Having worked for a multinational, independent or National operator or an oil and gas servicing company
- Possession of onshore and offshore experience
- Must have been actively involved in drilling and completion of at least 4 w
4. A minimum of 15% of the work experience must have been spent on active participation in Well Planning, Drilling & Completion Design 5. Relevant Safety Certification.
Required Years of Experience: 3 – 7yrs.
Qualification: Eng. Degree or relevant qualification & IWCF
B. Drilling Engineer
1. Job Position: Senior Consultant
Expectation:
-
- Having worked for a multinational, or independent or National operator or an oil and gas servicing company
- Possession of onshore and offshore experience
- Must have been actively involved in drilling and completion of at least 12 w
- A minimum of 25% of the work experience must have been spent on active participation in Well Planning, Drilling & Completion Design, and Well Operations Management
5. Relevant Safety Certification.
Required Years of Experience: Above 15yrs.
Qualification: Eng. Degree or relevant qualification & IWCF
2. Job Position: Drilling Engineer (mid-level)
Expectation:
- Having worked for a multinational, or independent or National operator or an oil and gas servicing company
- Possession of onshore and offshore experience
- Must have been actively involved in drilling and completion of at least 8 w
- A minimum of 20% of the work experience must have been spent on active participation in Well Planning & Completion Design
- Relevant Safety Certification.
Required Years of Experience: 5 – 15yrs.
Qualification: Eng. Degree or relevant qualification & IWCF
3. Job Position: Drilling Engineer (Junior Consultant)
Expectation:
- Having worked for a multinational, or independent or National operator or an oil and gas servicing company
- Possession of onshore and offshore experience
- Must have been actively involved in drilling and completion of at least 4 w
- A minimum of 15% of the work experience must have been spent on active participation in Well Planning & Completion Design
- Relevant Safety Certification.
Required Years of Experience: 2 – 5yrs.
Qualification: Eng. Degree or relevant qualification & IWCF
C. Completions Engineer: Design and Plan CompletionProgram
- Job Position: Senior Consultant
Expectation:
- Expertise in preparing detailed Testing and Completion Programs and procedures, Preparation at Test a Completion Budgets, and Authorization for Expenditure (AFEs.
- Possession of onshore and offshore experience.
- Should have worked for a Multinational or Independent or National operator or Service Company
- Should be able to provide a detailed scope of work for Well Completions and related services
- Design well completions and be involved in planning, supervision, and execution of completion programs on the rig (onshore or offshore)
- Convene planning meetings such as Completing Well on Paper (CWOP) amongst others and ensure actions are taken to mitigate all risks in the program Monitor completions performance and provide benchmark statistics to ensure completions are time and cost-effective.
- Visit contractor bases and ensure tool selection is correct and meets all QA/QC requirements
8. Mentor, motivates, and competently develop junior technical staff
Required Years of Experience: Above 15yrs.
Qualification: Eng. Degree or relevant qualification & IWCF
2. Job Position: Mid- Level
Expectation:
- Should have worked for a Multinational or Independent or
National operator or Service Company
- Should be able to provide a detailed scope of work for completions and related services
3. Design well completions and be involved in planning, supervision, and execution of completion programs on the rig (onshore or offshore)
- Hold planning meetings, CWOP, etc., and ensure actions are taken to mitigate all risks in the program
- Monitor completions performance and provide benchmark statistics to ensure completions are time and cost-effective
6. Visit contractor bases and ensure tool selection is correct and meets all QA/QC requirements
7. Mentor, motivates and competently develops junior technical staffs
Required Years of Experience: Above 15yrs.
Qualification: Eng. Degree or relevant qualification & IWCF
3. Job Position: Junior Consultant
Expectation:
- Should be able to participate in providing detailed scope of work for completions and related services
- Should be able to identify well completions equipment and participate in planning and execution of completion programs on the rig (onshore or offshore)
- Participate in CWOP and ensure actions are taken to mitigate all risks in the program.
- Monitor completions performance and provide benchmark statistics to ensure completions are time and cost-effective
5. Contractor bases should be visited and ensure tool selection is correct and meets all QA/QC requirements
Required Years of Experience: Above 2- 5yrs.
Qualification: Eng. Degree or relevant qualification & IWCF
D. Production Operations Engineer:
- Job Position: Senior Consultant
Expectation:
- Should have worked for a Multinational or Independent or National operator or Service Company
- Should be able to monitor production parameters and individual facilities. Make recommendations for remedial actions where anomalies are observed.
- Provide recommendations for oil production increase through improvements in the wellhead, choke setting, tubing size, gas lift injection rates, and separator pressures
4. Provide operations input into the design of wells and completions, as well as during well clean-up operations
- Monitor production target versus actual daily production with a view to increasing and optimizing production
- Supervises, mentors, motivates, and competently develops junior technical staff.
Required Years of Experience: Above 15yrs.
Qualification: Engineering Degree or relevant qualification
2. Job Position: Mid-level
Expectation:
- Should have worked for a Multinational or Independent or National operator or Service Company
- Should be able to monitor production parameters and individual facilities Make recommendations for remedial actions where anomalies are observed.
- Provide recommendations for oil production increase through improvements in the wellhead, choke setting, tubing size, gas lift injection rates, and separator pressures
4. Provide operations input into the design of wells and completions, as well as during well clean-up operations
- Monitor production target versus actual daily production with a view to increasing and optimizing production
6. Mentors motivate and competently develop junior technical staff
Required Years of Experience: Above 5 – 10yrs.
Qualification: Engineering Degree or relevant qualification
3. Job Position: Junior Consultant
Expectation:
- Should be able to monitor production parameters and individual facilities Make recommendations for remedial actions where anomalies are observed.
- Provide recommendations for oil production increase through improvements in the wellhead, choke setting, tubing size, gas lift injection rates, and separator pressures
3. Provide operations input into the design of wells and completions, as well as during well clean-up operations
4. Monitor production target versus actual daily production with a view to increasing and optimizing production
Required Years of Experience: Above 5yrs.
Qualification: Engineering Degree or relevant qualification
indicate the positions for which you are applying and also sign your CV.
ALL CVS AND CREDENTIALS SHOULD BE FORWARDED TO:
hr@6ma.d1b.myftpupload.com
Deadline: 01:02: 2023
QUALIFICATION:
B.SC ACCOUNTING (ACA is a very strong advantage)
OTHER REQUIREMENTS:
- Proficient in the Use of Accounting Software (SAGE ONE an Added Advantage)
- Compent use of MS Excel, Power Point and Microsoft Office
- Very Vast Knowledge of both Direct and indirect Taxes (VAT, WHT etc)
- Knowledgeable on management and treatment of fixed asset
- Ability to prepare Financial Report
PERSONAL TRAITS:
- Ability to work under little or no Supervision
- Ability to work under Pressure
- Team player
- Sound Analytical Reasoning
- Self Driven and Result Oriented
- Willingness to take up challenges
- Ability to meet deadlines
Additional requirement: must not be more than 35 years.
ALL CV AND CREDENTIALS SHOULD BE FORWARDED TO:
hr@6ma.d1b.myftpupload.com
Deadline: 29th of July 2021.
QUALIFICATION:
B.SC ACCOUNTING (ACA is a very strong advantage)
OTHER REQUIREMENTS:
- Proficient in the Use of Accounting Software (SAGE ONE an Added Advantage)
- Compent use of MS Excel, Power Point and Microsoft Office
- Very Vast Knowledge of both Direct and indirect Taxes (VAT, WHT etc)
- Knowledgeable on management and treatment of fixed asset
- Ability to prepare Financial Report
PERSONAL TRAITS:
- Ability to work under little or no Supervision
- Ability to work under Pressure
- Team player
- Sound Analytical Reasoning
- Self Driven and Result Oriented
- Willingness to take up challenges
- Ability to meet deadlines
Additional requirement: must not be more than 35 years.
ALL CV AND CREDENTIALS SHOULD BE FORWARDED TO:
hr@6ma.d1b.myftpupload.com
Deadline: 29th of July 2021.
RECRUITMENT REQUIREMENTS
Job Position: ICT Supervisor
Expectation:
To manage IT facilities and support operations in a fast-growing company with a minimum staff strength of 80 and two main offices ( Port Harcourt and Lagos)
Skill:
- Able to resolve issues relating to computer systems and technology
- Ability to develop staff on IT and advances
- Critical thinking and analytical skill
- Good communication skill
Key Responsibilities:
- Knowledge of the operations of software applications
- Knowledge of installation, maintenance, and troubleshooting company’s computer system, and network
- Ability to develop and maintain, data entering, information sourcing from the net
- Ability to maintain a productive dynamic environment for the use of computer
- Administering and maintaining the company internet protocols
- Able to maintain information technology and assess system risk
- Knowledge of information security
- Good Knowledge of IT components
- Training of staff
Additional Requirement:
- General knowledge of MS office, Excel, Power point & computer administration
- The ability to be proactive and use initiative to see what needs doing and to do it
- Flexibility
Qualification:
- Bachelor of computer science or information technology management and computer engineering
- A minimum of 2.2, but a master’s degree is an advantage
- Other professional qualifications will be added advantages such as Cisco certified network associate (CCNA), Microsoft certified professional (NIIT),
- Ethically compliant
- And at least 5 years of work experience in ICT.
ALL CV AND CREDENTIALS SHOULD BE FORWARDED TO:
hr@6ma.d1b.myftpupload.com
Deadline: 31ST JANUARY 2023
QUALIFICATION:
B.SC ACCOUNTING (ACA is a very strong advantage)
OTHER REQUIREMENTS:
- Proficient in the Use of Accounting Software (SAGE ONE an Added Advantage)
- Compent use of MS Excel, Power Point and Microsoft Office
- Very Vast Knowledge of both Direct and indirect Taxes (VAT, WHT etc)
- Knowledgeable on management and treatment of fixed asset
- Ability to prepare Financial Report
PERSONAL TRAITS:
- Ability to work under little or no Supervision
- Ability to work under Pressure
- Team player
- Sound Analytical Reasoning
- Self Driven and Result Oriented
- Willingness to take up challenges
- Ability to meet deadlines
Additional requirement: must not be more than 35 years.
ALL CV AND CREDENTIALS SHOULD BE FORWARDED TO:
hr@6ma.d1b.myftpupload.com
Deadline: 29th of July 2021.
QUALIFICATION:
B.SC ACCOUNTING (ACA is a very strong advantage)
OTHER REQUIREMENTS:
- Proficient in the Use of Accounting Software (SAGE ONE an Added Advantage)
- Compent use of MS Excel, Power Point and Microsoft Office
- Very Vast Knowledge of both Direct and indirect Taxes (VAT, WHT etc)
- Knowledgeable on management and treatment of fixed asset
- Ability to prepare Financial Report
PERSONAL TRAITS:
- Ability to work under little or no Supervision
- Ability to work under Pressure
- Team player
- Sound Analytical Reasoning
- Self Driven and Result Oriented
- Willingness to take up challenges
- Ability to meet deadlines
Additional requirement: must not be more than 35 years.
ALL CV AND CREDENTIALS SHOULD BE FORWARDED TO:
hr@6ma.d1b.myftpupload.com
Deadline: 29th of July 2021.
QUALIFICATION:
B.SC ACCOUNTING (ACA is a very strong advantage)
OTHER REQUIREMENTS:
- Proficient in the Use of Accounting Software (SAGE ONE an Added Advantage)
- Compent use of MS Excel, Power Point and Microsoft Office
- Very Vast Knowledge of both Direct and indirect Taxes (VAT, WHT etc)
- Knowledgeable on management and treatment of fixed asset
- Ability to prepare Financial Report
PERSONAL TRAITS:
- Ability to work under little or no Supervision
- Ability to work under Pressure
- Team player
- Sound Analytical Reasoning
- Self Driven and Result Oriented
- Willingness to take up challenges
- Ability to meet deadlines
Additional requirement: must not be more than 35 years.
ALL CV AND CREDENTIALS SHOULD BE FORWARDED TO:
hr@6ma.d1b.myftpupload.com
Deadline: 29th of July 2021.
Driver Job Summary
We are looking for a driver to operate our truck and vehicles. As a driver, you must have a safe driving record, follow all state and national driving laws, rules, and regulations. In this position, you will follow prearranged routes to destinations or use maps and GPS to navigate routes. You will also maintain vehicle upkeep and cleanliness.
Driver Duties and Responsibilities
- Practice safe driving habits
- Follow all state and national safety regulations and standards
- Accurately follow routes, maps, and directions
- Keep exterior of vehicle clean and presentable
- Maintain vehicle equipment; replace oil, fill gas tank, perform general motor vehicle maintenance as needed for safety
- Clean windows, windshields, and mirrors as needed
- Keep interior of vehicle clean of debris and clutter
- Complete documentation such as logs, mileage
- Ensure that the truck/vehicle is maintained and serviced as when due.
Driver Requirements and Qualifications
- Demonstrate safe driving practices
- Able to follow verbal directions, read maps
- Able to work well alone
- Reliable and punctual with dedicated professionalism to job and duties
- Able to adapt to changing schedules or routines
- Excellent time management skills
- Organized and able to follow a schedule
- Focused on customer service
- Positive attitude and professional demeanor
- Physically able to reach, stretch, bend, and sit for long periods of time during daily routine
- Previous professional experience driving preferred; training may be provided
- Able to work weekends and holidays as needed
Educational Qualification:
- SSCE, WAEC, or any higher degree is an added advantage
Additional Information:
- Not more than 35 years of age
- Valid driver’s license and clean driving record
To apply send CV and credentials to hr@6ma.d1b.myftpupload.com
Failure to attach credentials automatically disqualifies a candidate.
deadline 30th June, 2021
EDUCATIONAL QUALIFICATION: A minimum of 2.1 (second class upper) with masters degree or first class in Petroleum Engineering, Chemical Engineering, Pure and Industrial Chemistry or Gas Engineering.
GENERAL WORK RESPONSIBILITIES
- Surface sampling of reservoir fluids to ensure that representative samples are taken which include surface sampling of separator oil and gas, well head fluid, flow line fluid, fuel and flare gas, stock tank and export fluid, formation water, etc samples
- Phase behaviour studies of reservoir fluids on bottom hole and separator samples which involves validation of surface and subsurface samples, restoration to ensure homogeneity of surface and subsurface samples, phase behaviour studies of reservoir fluids, constant-composition expansion test, differential liberation test, constant-volume depletion test, single and multi-stage separator test, atmospheric flash of sample from PVT cell to stock tank conditions to determine gas-oil ratio (GOR), formation volume factor, and shrinkage factor of the sample, hydrocarbon fluid compositional analysis using a gas chromatograph, oil-base mud contamination studies of reservoir fluid samples, live oil viscosity measurement, recombination of separator oil and gas samples to corrected field GOR or to a specified saturation pressure to produce reservoir fluid sample for reservoir condition analysis, transfer of reservoir fluid samples from samplers (MDT, RDT and RCI) to PVT piston cylinders, maintenance and calibration of DBR, Chandler and Vinci PVT cells and other laboratory equipment, water analysis
- Operation, maintenance, and calibration of PVT equipment
- Crude assay analysis: Reid vapour pressure measurement, basic sediments and water measurement, density, API and specific gravity measurements, sulphur content measurement, dead oil viscosity measurements
- Flow assurance studies which include solid detection/solubility studies (asphaltene and wax precipitation onset studies, solvent titration studies, live oil titration studies, saturation pressure confirmation studies, chemical inhibition studies), asphaltene and wax content measurements, Saturates-Aromatics-Resins-Asphaltenes (SARA) group characterization of crude oil, cloud and pour point measurements
- Water and hydrocarbon dew point measurement of natural gas
- Detection and measurement of the quantity of contaminants in a hydrocarbon gas sample using a Drager instrument and tube
- Ensured accuracy, validity and completeness of experimental results
- Reporting of PVT and flow assurance analysis measurements
- Preparation of validation and complete PVT report on reservoir fluid samples
- PVT simulation of fluid properties with a compositional simulator like eclipse PVT I, calsep PVTsim and PVTp by petroleum expert.
- Analysis and interpretation of PVT data
Relevant experience may be an added advantage.
COMPUTER SKILLS:
- Computer fundamentals, Internet Applications, Operating system of Windows, Microsoft Office Word, Excel and PowerPoint
PERSONAL PROFILE
- Effective communication in written and spoken English
- Problem solving skills
- Time management skills
- Ability to work effectively in a team with strong analytical mind
- Self-motivated and target-oriented
- Effective use of initiative
- Ability to work under pressure to meet challenging targets
- Physical and mental alertness
- Ability to read and write report
- Ability to learn fast seeking continuous improvement
- A positive work attitude
- Ability to express technical information in a creative and simple manner
- High level of integrity, transparency, and respect for people
- Ability to think innovatively
Not more than 35 years of age.
Must have completed NYSC
To apply send CV and credentials to hr@6ma.d1b.myftpupload.com
Failure to attach credentials automatically disqualifies a candidate.
deadline 21st June, 2021
POSITION: DRILLING ENGINEER
POSITION: DRILLING ENGINEER
OVERALL PURPOSE AND OBJECTIVE:
To plan, develop and execute Drilling operations as required on land, on offshore platforms or on mobile drilling units. You’ll be involved from the initial well design to testing, completion and abandonment.
DUTIES, RESPONSIBILITIES & ACCOUNTABILITIES:
- prepare well data sheets
- design and select well-head equipment
- draw up drilling programmes, taking account of desired production flow rates
- obtain relevant data, carrying out engineering analysis on site, recommending necessary actions and writing up reports
- monitor the daily progress of well operations
- keep track of current daily costs, comparing actual costs with expenditure proposals and recommending cost-effective changes
- liaise with specialist contractors and suppliers, such as cement companies or suppliers of drilling fluids
- monitor safety and ensure the good maintenance of the well
- adhere to environmental protection standards, in some cases through direct discussion with local governments to ensure compliance with legislative requirements
- establish and administer drilling and service contracts
- coordinate and supervise the work of the drilling team
- undertake engineering design and the planning of wells (including development work)
- design directional well paths (horizontally or multi-laterally, as appropriate)
- manage operations on behalf of small clients
- contribute to conceptual field development design
- work with multidisciplinary professionals to evaluate the commercial viability of the well and monitor progress during drilling
- return the site to its natural environmental setting if drilling isn’t pursued.
COMPETENCE IN DRILLING ENGINEERING:
- Maintain well control
- Develop casing programs (sizes, setting depths)
- Design casing
- Maintain regulatory compliance
- Select the mud program
- Design a directional well path (including horizontal/multilaterals)
REQUIRED SKILLS:
- strong communication and interpersonal skills, as well as the ability to build and maintain relationships with a range of people
- a good technical understanding of the scientific principles of disciplines such as geology, physics, maths and chemistry
- a high level of numeracy and IT skills
- the analytical ability to think through potentially complex problems and develop solutions
- initiative and drive
- teamwork skills and the ability to cooperate with others
- sensitivity to different cultures and ways of working
- the ability to work under pressure.
REQUIRED EXPERIENCE:
5 to 10 years experience in Drilling operations
NOTE : VACANCY IS ONLY FOR EXPATRIATES WITH 5-10 YEARS EXPERIENCE
Send CV and Credentials to hr@6ma.d1b.myftpupload.com
Closing Date: 4th March. 2021
POSITION: FINANCE & ADMINISTRATIVE SERVICES
POSITION: FINANCE & ADMINISTRATIVE SERVICES
RESPONSIBILITIES
- Create and update spreadsheets of daily transactions
- Manage accounts receivable and payable
- Review and process reimbursements
- Prepare budgets
- Maintain reports on financial metrics, including investments, return on assets and growth rates
- Keep records of invoices and tax payments
- Manage company’s liabilities (e.g. insurance premium)
- Identify and address account discrepancies
- Participate in payroll processes
- Report on financial projections (e.g. liquidity and cash flow)
- Creating and updating spreadsheets of daily transactions
- Managing accounts receivable and payable
- Reviewing and processing reimbursements
REQUIREMENTS
- Proven work experience as a Finance Administrator, Finance Assistant or similar role
- Hands-on experience with accounting software, like QuickBooks
- Advanced knowledge of MS Excel (creating spreadsheets and charts and using financial Excel functions)
- Good understanding of bookkeeping procedures
- Time-management and organization skills
- Confidentiality
- BSc degree in Finance, Accounting or Economics
REQUIRED EXPERIENCE:
5 to 10 years experience in Fiance and Administrative Services
Overall Purpose and objective:
To directs, plan and supervises large construction projects. And also responsible for ensuring the project is completed on budget and within scope.
RESPONSIBILITIES
- Determine and define scope of work and deliverables
- Predict resources needed to complete project
- Obtain necessary permits, approvals, and other regulatory prerequisites
- Draft and submit budget based on scope of work and resource requirements
- Manage costs in order to meet budget
- Provide direction over contracts and subcontracts
- Manage construction schedule and activities
- Issue progress updates as needed regarding costs and timelines
- Ensure work is done in compliance with all relevant building and safety codes
- Select and manage subcontractor and supplier relationships
- Coordinate efforts across entire project between architects, designers, engineers, and subcontractors
REQUIREMENT:
- Bachelor’s degree in Building Construction, Construction Management, Civil Engineering, or Architecture
- Comfortable reading and understanding blueprints and drawings
- Proficient in Microsoft Office and general computer software
- Demonstrated knowledge of construction, engineering, and architecture principles
- Ability to budget, schedule, negotiate, and control costs
- High degree of familiarity with contract and subcontract documents, terms, and conditions
- Strong leadership and management skills
REQUIRED EXPERIENCE:
5 to 10 years experience in Engineering, Construction And Project Management
NOTE : VACANCY IS ONLY FOR EXPATRIATES WITH 5-10 YEARS EXPERIENCE
Send CV and Credentials to hr@6ma.d1b.myftpupload.com
Deadline : 4th March, 2021
POSITION:OFFSHORE MAINTENANCE, PRODUCTION AND SUPPORT SPECIALIST
POSITION: OFFSHORE MAINTENANCE, PRODUCTION AND SUPPORT SPECIALIST
Overall Purpose and objective:
Responsible for managing the overall maintenance operations associated with oil and gas installation, which could be an offshore platform or vessel.
RESPONSIBILITIES:
- Monitors equipment and systems to ensure that the required performance is maintained
- Ensure the effective working of the permit to work system
- Develop data extractions or develop reports from requests or requirements stated by clients, and to investigate data related issues.
- Track and appropriately escalate production issues & report periodically to group charged with monitoring uptime and efficiency of production application.
- Analyze production issues to determine root cause and provides fix recommendations to the development team.
- Support tasks to include alert monitoring for periodic jobs, opening trouble tickets, general escalation, client coordination, and vendor interactions.
- Assist with planning and testing of application, configuration and database changes, and installation of upgrades and patches and update production support documentation.
REQUIRED SKILLS:
- Must have problem solving skills and be capable of breaking down complex situations to discover and resolve root causes, this applies to both technical issues and process issues.
- Good communication skills both verbal and writing with the ability to discuss issues with users.
- Understanding of database concepts.
REQUIRED EXPERIENCE:
- 5 to 10 years experience in Offshore Maintenance, Production And Support Specialist
- Bachelor degree in Computer Science, Information Systems, Mathematics, Engineering or related field.
NOTE : VACANCY IS ONLY FOR EXPATRIATES WITH 5-10 YEARS EXPERIENCE
Send CV and Credentials to hr@6ma.d1b.myftpupload.com
Deadline: 4th March, 2021
POSITION:TECHNICAL EXPERTISE
POSITION: TECHNICAL EXPERTISE
Providing technical assistance, solving customer service queries, and troubleshooting hardware and software issues.
- Install and configure computer systems and applications within the company
- Respond to customer inquiries and assist in troubleshooting and resolving challenges
- Actively update, maintain and monitor all aspects of computer networks
- Resolve technical issues related to network interruptions
- Attend in-person meetings with clients to analyze, troubleshoot and diagnose hardware problems
- Maintain a working log detailed all required system updates, as well as the date of completion
- Organize and file documentation pertaining to warranties and instructional guides for computer hardware
SKILLS
- Programming languages
- Common operating systems
- Software proficiency
- Technical writing
- Project management
- Data analysis
REQUIRED EXPERIENCE:
5 to 10 years experience in Offshore Maintenance, Production And Support Specialist
NOTE : VACANCY IS ONLY FOR EXPATRIATES WITH 5-10 YEARS EXPERIENCE
Send CV and Credentials to hr@6ma.d1b.myftpupload.com
Deadline: 4th March, 2021
